For future reference : (because it will happen to you one day......
)Well known issue with the ML engines
Injector seals 5 x
Injector washer 5 x
Injector clamp bolts 5 x
(note : the stretch bolts are not re-usable and HAVE to be replaced)
All for the princely sum of GPB 26.02 (inc.vat)
Drop transverse gearbox bracket and fit longer bolts (3-4 inches) to keep in place
Stripping systems on cylinder head to gain access.
Drop back end of engine to create space above cilynder head to pull injector nbr 4 & 5 out.
Clean-up injector seats & shafts and general area iwo leaking injector
Rebuild as required.
8 hours labour @ GPB. 40,- = GBP.320,00 (ex vat)
Total bill : GBP 401.56 (in vat)
Garage went ahead replacing all 5 seals because the impact in labour and materials is negligable. If nbr.4 went at a later date I'd have to go
through the whole process again or drill a hole in the plate above.
Also see topic in tech. with info from difflock.
http://www.birtydastards.com/frm/index.php?topic=12145.0