Topic: Gears gears gears (Read 12792 times)

francisolya · « **Reply #25 on:** January 08, 2015, 01:46:59 PM »

Hard to get a good look on pox phone but Looks very good Pky,will be very nice,I'll have to make do with 1 im afraid but confident I can fix it,as bad as it is I may be lucky as it seems they can be much much worse and very prone to rot..where did you find those wheels?(another problem I have to sort)im going to look for dif tags and take some pics later

wildwood · « **Reply #26 on:** January 08, 2015, 01:57:26 PM »

Or you could do what I had to do on my 1 ton axles.....pull the diff covers and count the teeth of crown wheel and pinion the divide....... Messy but gets the job done

j33pky · « **Reply #27 on:** January 08, 2015, 02:16:14 PM »

Or put in neutral and spin wheel one turn and count how many turns of pinion does for a rough guide. Wheels are 16x8 Mickey Thompson classic 3 with 315/75r16 Cooper discoverwe stt. And what Keen eyes you have wildwood. To be honest that's a old pic and workshop much tidyer now. Some one gave me the planner it's not a bad bit of kit.

wildwood · « **Reply #28 on:** January 08, 2015, 02:31:29 PM »

And also reminds me looking at your dust extraction Scheppach that mine is rogered and I have to remove the fan cover to spin it up to get it started and it's a dusty little fecker after 10 years of abuse.......
Luckily MauMart have a 10% off tonight and on Sunday......

So no rear winch for me for a couple of months.......

Bulldog67 · « **Reply #29 on:** January 08, 2015, 02:32:03 PM »

Tidier

j33pky · « **Reply #30 on:** January 08, 2015, 02:35:43 PM »

It's all your fault and your mountain of bits!

Or in the words of sparky.. Shit... Started tidying and just kept going.. Now I cam move around and work

j33pky · « **Reply #31 on:** January 08, 2015, 02:37:20 PM »

Quote from: wildwood on January 08, 2015, 02:31:29 PM

And also reminds me looking at your dust extraction Scheppach that mine is rogered and I have to remove the fan cover to spin it up to get it started and it's a dusty little fecker after 10 years of abuse.......
Luckily MauMart have a 10% off tonight and on Sunday......

So no rear winch for me for a couple of months.......

That sound finger tickling dangerous!

JamesH · « **Reply #32 on:** January 08, 2015, 05:45:48 PM »

Quote from: v8 bubba on January 08, 2015, 10:30:11 AM

i think j20 is running a 6pot yota engine and is uber nice

Old Jeep, D60/D70 and Toyota diesel

francisolya · « **Reply #33 on:** January 08, 2015, 06:47:58 PM »

Definate 4.88 ratios,is there a way of loading pics direct to here?

Dutch · « **Reply #34 on:** January 08, 2015, 07:22:20 PM »

Quote from: francisolya on January 08, 2015, 06:47:58 PM

Definate 4.88 ratios,is there a way of loading pics direct to here?

At the bottom of your post (while still writing it) click attachments and other options

Choose File ..... that activates browse folders - choose the pic that you want to upload.

click (more attachments) and repeat the above

dieselj20 · « **Reply #35 on:** January 08, 2015, 09:06:58 PM »

Old Jeep, D60/D70 and Toyota diesel

[/quote] 24 valve 4.2 intercooled turbo diesel

dieselj20 · « **Reply #36 on:** January 08, 2015, 09:11:18 PM »

Toyota 6 cylinder 24 valve turbo intercooled diesel

j33pky · « **Reply #37 on:** January 08, 2015, 09:38:06 PM »

Nice... Mpg?

dieselj20 · « **Reply #38 on:** January 08, 2015, 09:47:41 PM »

on a drive to Scotland it returned 26 mpg

Dave The Sparky · « **Reply #39 on:** January 08, 2015, 10:46:38 PM »

Did you have to scrap a lovely Landcruiser to get one of those??

francisolya · « **Reply #40 on:** January 08, 2015, 11:41:56 PM »

Pics I hope !!thanks Dutch,was kinda dumb not seeing that in first place

j33pky · « **Reply #41 on:** January 09, 2015, 08:43:18 AM »

Very nice.... Externaly there does not appear to be loads off rot! Grill and spec implies a 79. What does vin read?

francisolya · « **Reply #42 on:** January 09, 2015, 08:51:31 AM »

Thanks,fair bit covered up I think but who knows until you start stripping,A pillars look like someone just poured fibre glass resin in until full

!!i do have an old pic of vin plate I'll try find now but forgot to snap yesterday

dieselj20 · « **Reply #43 on:** January 09, 2015, 09:00:09 AM »

Quote from: Dave The Sparky on January 08, 2015, 10:46:38 PM

Did you have to scrap a lovely Landcruiser to get one of those??

no someone did it for me it was out of a 98 low milage chassis bent
fitted in my j truck in 2001

francisolya · « **Reply #44 on:** January 09, 2015, 09:00:14 AM »

dieselj20 · « **Reply #45 on:** January 09, 2015, 09:10:59 AM »

Quote from: francisolya on January 09, 2015, 09:00:14 AM

Vin

http://oljeep.com/gw/vin_72-80.html
79 4 speed

francisolya · « **Reply #46 on:** January 09, 2015, 09:32:48 AM »

And looks like an M in pic but it's RHD ,the botched hydro clutch pedal had me thinking auto conversion

francisolya · « **Reply #47 on:** January 09, 2015, 09:36:37 AM »

Quote from: dieselj20 on January 08, 2015, 09:47:41 PM

on a drive to Scotland it returned 26 mpg

looks very tidy,I'm guessing you put cruiser box/transfer in also?

francisolya · « **Reply #48 on:** January 09, 2015, 10:56:12 AM »

Front gears sorted I hope,3.54 gear and carrier SH from ebay US..plain oul 2 pin

Dutch · « **Reply #49 on:** January 09, 2015, 11:01:08 AM »

Love those trucks, wish I was a bit more hillbilly

Some work there Francis to get it up to spec.

That original green looks a very nice colour, you going back to that ?

Author Topic: Gears gears gears (Read 12792 times)

francisolya

j33pky

j33pky

j33pky

francisolya

dieselj20

dieselj20

j33pky

dieselj20

francisolya

j33pky

francisolya

dieselj20

francisolya

dieselj20

francisolya

francisolya

francisolya