Topic: ZJ rear sway bar (Read 3395 times)

MOCAJ · « **on:** May 10, 2008, 10:16:14 PM »

i know some of the xj boys chuck the rear sway bar over the hedge

wot about the ZJ, its a 97 we are lifting 2" 8-)

greggmo · « **Reply #1 on:** May 10, 2008, 10:42:09 PM »

keep it.

Bubba · « **Reply #2 on:** May 10, 2008, 10:43:35 PM »

arnt zjs on coils if so defo keep it

Bishops Finger · « **Reply #3 on:** May 10, 2008, 11:17:39 PM »

ZG's are coils...which lift are you going for MOCAJ?

daggie · « **Reply #4 on:** May 11, 2008, 06:22:47 AM »

tis needed

MOCAJ · « **Reply #5 on:** May 11, 2008, 07:36:52 AM »

thanks fellas :-D

Bubba · « **Reply #6 on:** May 11, 2008, 10:36:34 AM »

if you took it off you would shit yaself for sure tis deffo needed spose the higher you lift you would need longer or adjustable ones

tartanzj · « **Reply #7 on:** May 12, 2008, 05:31:03 PM »

If you're talking about rear trackbar then it is required. On a 2" lift the body will pull slightly to the RHS but won't cause any rubbing/binding issues and isn't too noticeable. I had to put on an adjustable one when I went to 4.5".

If its the anti-roll bar. You could ditch it. I kept it on the 2" lift so restricted articulation. Took mine off when I went higher cos I didn't buy extended links and I haven't noticed too much difference. I suppose if you drive it hard into corners you might want to keep it on but I reckon take it off, see the difference on/off-road; if you don't like it you can always stick it back on :-)

Dodster · « **Reply #8 on:** May 12, 2008, 07:39:47 PM »

I might have this completely wrong... :-D

JamesH · « **Reply #9 on:** May 12, 2008, 09:01:37 PM »

If you were replacing springs with stiffer ones and similar with shocks then you could possibly ditch it. Given the weight of a ZJ and the coils all round I'd keep the bar with what you have planned.

The few coil-converted XJs out there normally find the rear a bit unstable without some kind of anti-roll bar. I know one guy in the US fabricated the Currie Antirock system into the rear of his XJ for a compromise between stability and flex.

PtP · « **Reply #10 on:** May 12, 2008, 09:47:40 PM »

Some of you may have seen this before, but a friend of mine runs a well sorted 80 series Landcruiser which has coils all round on live axles and has both front and rear anti-roll bars removed. It looks very tippy when it’s pushed hard into corner at speed, but I’m not aware he has ever lost it! I think he has just had to adjust his driving style, but I have heard a front wheel has been lifted on the odd occasion whilst cornering too hard! :lol:

Have a look here and follow some of the links on the page to give you some more detail.

http://www.mudtoys.com/index.php?option ... 6&Itemid=9

Bishops Finger · « **Reply #11 on:** May 12, 2008, 09:50:54 PM »

The Stourbridge possee havn't been racing roung Maccy D's carpark again?

Author Topic: ZJ rear sway bar (Read 3395 times)

MOCAJ

ZJ rear sway bar

greggmo

(No subject)

Bubba

(No subject)

Bishops Finger

(No subject)

daggie

(No subject)

MOCAJ

(No subject)

Bubba

(No subject)

tartanzj

(No subject)

Dodster

(No subject)

JamesH

(No subject)

PtP

(No subject)

Bishops Finger

(No subject)