Topic: Wrangler TJ should make excellent punch hunt truck... (Read 23878 times)

Cockney Boy · « **Reply #25 on:** December 15, 2012, 03:29:41 PM »

If you need to change the steering box, just remember its a whole lot easier without a winch plate in situ.

Green Jeep · « **Reply #26 on:** December 16, 2012, 11:08:26 AM »

Quote from: Nosebolt on December 15, 2012, 02:52:26 PM

do like the way you have incorporated the original inner wing and some of the top, not an option open to me on Tonka as they had to much rot on inner and outer but will keep in mind for yella if we ever get around to starting the rebuild

Thanks, was mainly done this way for ease of the build, the aim is to get the protection we need easily and with what we had to hand, so far it's three days build time and only £35 for pipe, everything else has been to hand from previous works or what Toby has picked up from the scrap pile, his garage is near a breakers yard/weigh bridge and anything interesting comes in he gets a shout...

Thanks for winch plate/steering box info, we have to weld it on, but a 9" grinder will soon have it off if needed, winch tray will be bolted so that can be easily removed if required.

Should have some more pics towards the end of next week....

Cheers Maf

Panic mechanic! · « **Reply #27 on:** December 16, 2012, 11:27:52 AM »

hmmm you sure you are not going all renegade?

Green Jeep · « **Reply #28 on:** December 16, 2012, 11:41:39 AM »

haha,

That is truely shocking eh?

Panic mechanic! · « **Reply #29 on:** December 16, 2012, 11:45:27 AM »

its jhay built!

jay140285 · « **Reply #30 on:** December 16, 2012, 09:24:55 PM »

Quote from: Panic mechanic! on December 16, 2012, 11:45:27 AM

its jhay built!

Green Jeep · « **Reply #31 on:** December 19, 2012, 02:10:17 PM »

Winch tray bolted onto the welded plate, winch sitting nicely.

Need to get some paint on asap!

Bulldog67 · « **Reply #32 on:** December 19, 2012, 07:05:32 PM »

by all means slaughter me (as usual

) but what the frick is that

wont P&O have the hump and want it back soon

Cockney Boy · « **Reply #33 on:** December 19, 2012, 07:20:22 PM »

Quote from: Bulldog67 on December 19, 2012, 07:05:32 PM

by all means slaughter me (as usual ) but what the frick is that wont P&O have the hump and want it back soon

Your a very mean and nasty man

I love following these threads and watching the progress of a build. Keep up the good work

MOCAJ · « **Reply #34 on:** December 19, 2012, 07:31:48 PM »

BD wouldn't know a decent winch if it bit him on the arse

Panic mechanic! · « **Reply #35 on:** December 19, 2012, 09:23:52 PM »

I heard he is in secret talks with that guy with the apache in kidderminster to buy that monster!

Bulldog67 · « **Reply #36 on:** December 19, 2012, 09:37:39 PM »

Then i wud hav 200% more workin trucks tban u my little lilliputian and i wouldnt do that to ya

isle of man · « **Reply #37 on:** December 19, 2012, 09:39:58 PM »

RELAX!!!!

Green Jeep · « **Reply #38 on:** December 20, 2012, 10:50:26 AM »

Quote from: Bulldog67 on December 19, 2012, 07:05:32 PM

by all means slaughter me (as usual ) but what the frick is that wont P&O have the hump and want it back soon

Haha, its a Warn 8274, personally I think its the best winch for the job, fast, strong, easy to rebuild/improve, spares easy to get.

Running wide drum and less rope so doesn't get bunched up.

Running Bow 1 motor for reliable set up over speed, have heard faster motors can burn out when loaded right up.

Rebuilt it earlier this year and shake down over 4 events, happy days.

Green Jeep · « **Reply #39 on:** December 23, 2012, 07:01:31 AM »

Roof has arrived

Will cut up and make crew cab...

Ezz · « **Reply #40 on:** December 23, 2012, 08:45:46 AM »

I might to do the same...

Green Jeep · « **Reply #41 on:** December 24, 2012, 05:05:36 PM »

Quote from: Ezz on December 23, 2012, 08:45:46 AM

I might to do the same...

Get on! Here's some food for thought...

Had a good few hours at Toby's workshop and really taking shape now...

Toby worked on rear bumper, I cut up new roof, got old one off, cleared out rear tub, chopped off rear part of internal roll cage, rear tub is really clean, happy days....

Cut rear tub corners off, protection will flow these lines...

Rear arch chopped out...

Rear bumper (upside down) whilst Tobster welds up angles...

Roof will (of course be painted)... but check the redneckness out of it all...

Will crack on after mid winter pagen festival and hopefully be up for CLCC event on 30th Dec

MOCAJ · « **Reply #42 on:** December 24, 2012, 05:20:07 PM »

like them front wings alot

but would have left the rear roll bar in till you got a full cage

Bulldog67 · « **Reply #43 on:** December 24, 2012, 05:55:42 PM »

you dont hang mate do ya !!

Green Jeep · « **Reply #44 on:** December 24, 2012, 06:12:23 PM »

Quote from: my other cars a jeep on December 24, 2012, 05:20:07 PM

like them front wings alot

but would have left the rear roll bar in till you got a full cage

Thanks! I'll let Toby know, they are really strong and set with tyres on full lock so if your wedged on a tree you can put full lock on and drive off

Roll cage will be in place before proper event, needed to lose rear section of it to plan what we are going to...

BD... no point hanging around :icon_winkle:crack on I reckon...

Really pleased with it, been messing around with lots of Cherokee's and this build is the culmination of idea's and what I need for the events/terrain that we have around here... happy days...

Green Jeep · « **Reply #45 on:** December 27, 2012, 05:26:19 PM »

Rear bumper, with two recovery points done...

Winch is all working now... hoping to try swamper's for size tomorrow...

MOCAJ · « **Reply #46 on:** December 27, 2012, 07:34:34 PM »

cut that exhaust back, its hanging there like a flacid dick just waiting to be ripped off

MOCAJ · « **Reply #47 on:** December 27, 2012, 07:39:10 PM »

Quote from: my other cars a jeep on December 27, 2012, 07:34:34 PM

cut that exhaust back, its hanging there like a flacid dick just waiting to be ripped off

sorry, should have said "pulled off"

isle of man · « **Reply #48 on:** December 27, 2012, 07:42:24 PM »

Yeah!! Throw it out the side, it just gets in the way when it flexes like a teen.......

Bubba · « **Reply #49 on:** December 27, 2012, 07:56:47 PM »

i realy like this build cos for once your truck does not look like it has just left the scene of a fatal rta

Author Topic: Wrangler TJ should make excellent punch hunt truck... (Read 23878 times)

Cockney Boy

Green Jeep

Panic mechanic!

Green Jeep

Panic mechanic!

jay140285

Green Jeep

Cockney Boy

Panic mechanic!

Green Jeep

Green Jeep

Green Jeep

Green Jeep

Green Jeep