Topic: i have a monkey on my back (Read 42875 times)

isle of man · « **Reply #25 on:** October 25, 2008, 10:42:39 PM »

hey mog axle's under a tj is great - for the terrain the uk has it's probably the best compromise.

really looking forward to see this project grow...

doublej · « **Reply #26 on:** October 25, 2008, 11:27:40 PM »

this baby is hopefully destined for a little more than just the uk.
i think the biggest compromise is weight, gearing can always be fixed for any type of driving.

Bubba · « **Reply #27 on:** October 26, 2008, 08:42:34 AM »

we had a few sets a of 60s n 70s in they ended up scrap as ther were no takers
i think wazza runs an auto with his portals

Warthog · « **Reply #28 on:** October 26, 2008, 10:31:24 AM »

Quote from: "V8 Bubba"

we had a few sets a of 60s n 70s in they ended up scrap as ther were no takers
i think wazza runs an auto with his portals

To rebuild 60's over here still costs a fair bit, once you stick what they use in them from over the pond :lol: )

doublej · « **Reply #29 on:** October 26, 2008, 08:19:07 PM »

Quote from: "Warthog"

(Anyway, all my comments are from what i pick up from others and research. So putting into practice is where it counts, Vapour Builds dont count )

Gotta start some where to get to this point mate!

greggmo · « **Reply #30 on:** October 26, 2008, 08:41:50 PM »

it would be cool to keep it at that hight and fit the mogs under.

Bubba · « **Reply #31 on:** October 26, 2008, 08:50:56 PM »

yess indeed that would very cool but could it be done

isle of man · « **Reply #32 on:** October 26, 2008, 09:02:14 PM »

yes it can - seem to recall a photo with a green TJ MOG equipped.

doublej · « **Reply #33 on:** October 26, 2008, 09:20:48 PM »

Sure it can - its a question of how much uptravel you want.

Well that or how much of the body you want to chop off.

Warthog · « **Reply #34 on:** October 26, 2008, 10:31:26 PM »

Quote from: "doublej"

Gotta start some where to get to this point mate!

Well Clayt and I will be up next weekend to give ya a hand :lol:

1/2" Dimple dies are in pro JJ But i dont think im gonna be able to source the tube mate :cry:

MogTJ, on Pirate4x4 Damn sexy looking thang.

doublej · « **Reply #35 on:** October 26, 2008, 10:54:47 PM »

screw looking at it on pirate - we're gonna look at one in my front yard!
ill forewarn ya thursday of the weekends todo list. :twisted:

no worries on the tubing, im going to just have to bite the bullet here soon. Do ya happen to know anywhere that sells domed tube caps?

Warthog · « **Reply #36 on:** October 27, 2008, 06:38:07 PM »

Quote from: "doublej"

screw looking at it on pirate - we're gonna look at one in my front yard!
ill forewarn ya thursday of the weekends todo list.

A little Birdy has told me that you should be getting a delivery on Saturday?

Dave69 · « **Reply #37 on:** October 27, 2008, 06:40:23 PM »

Quote from: "Warthog"

has it got a sideshift as well as up and down

doublej · « **Reply #38 on:** October 27, 2008, 07:09:34 PM »

no sideshift dave69, thats the steering ram your looking at.
and im only getting one "delivery" on saturday. the rest is going in the back of your rangie. i dont have anywhere to put it anyway lol.

oh and 1 3/4 outer dia and yeah anything roundish looking.

wazza · « **Reply #39 on:** October 27, 2008, 08:59:33 PM »

its lookin good so far,
if you want to get those wheel hubs off the stubs all i can say is good luck :-?

gearing wise ive had mine round the bloc a few times an i guess that it'll do about 45/50 full pelt if i dare. thats on a 4ltr AW4 np242

bubba youve taken the work right out my mouth, rockwells :-D :twisted:

doublej · « **Reply #40 on:** October 27, 2008, 11:37:56 PM »

yeah a friend removed the hubs with a press. I got my hub convo and brake adaptors from WEPS offroad, real simple and straight forward.
i think rocks are over rated, its nothing more than a poor mans mogs. but ive never ran them.

Bubba · « **Reply #41 on:** October 28, 2008, 08:49:57 AM »

i think some of the axels used in the front end of tractors would be interestin they give lots of clearance and seem amazingly slender for the work they do biggest down side is no brakes so you would have to put a disc conversion on the prop

doublej · « **Reply #42 on:** November 02, 2008, 08:27:07 PM »

well big props to aslyum and warthog.....................
we have a rear 4link mocked

a great mind at work

xr6jeeper · « **Reply #43 on:** November 02, 2008, 09:30:36 PM »

Coming along nicely, any chance of a better pic of the crossmember, have you made a new crossmember to mount the transmission and top links i cant see in the picture. :-)

xr6jeeper · « **Reply #44 on:** November 02, 2008, 09:32:44 PM »

Quote from: "xr6jeeper"

Coming along nicely, any chance of a better pic of the crossmember, have you made a new crossmember to mount the transmission and top links i cant see in the picture. :roll:

doublej · « **Reply #45 on:** November 02, 2008, 10:08:10 PM »

theres more pics here
http://http://www.createphpbb.com/mildenhalloffro/viewtopic.php?t=955&mforum=mildenhalloffro

but nothing is finished yet - its all just scrap metal tacked in place.
we honestly didnt think it was going to fit together till we were done.
then it was "wow! dude it works!"
ill post more as everything gets finalized

greggmo · « **Reply #46 on:** November 02, 2008, 10:24:27 PM »

cool. ya cant beat a good days spannerin with the boyz 8-)

doublej · « **Reply #47 on:** June 18, 2009, 10:35:34 PM »

alittle trimming goes a long way

rear upper frame mount

axle truss that broke my lil homemade bender

its sitting at ride height and i can almost sit up under the body - 26in under the frame rails

rear crossmember and lower link mount

there is a few more here - and more to come.......
http://www.flickr.com/photos/dokaishi/sets/72157611853243678/

Asylum · « **Reply #48 on:** June 19, 2009, 09:17:03 AM »

So where are you going to sit mate?

Nah, looking good. I like it.

king cj · « **Reply #49 on:** June 19, 2009, 09:43:56 AM »

ha ha thats wild, couldnt resist cutting more floor eh, i like it, crossmember looks good mate

Author Topic: i have a monkey on my back (Read 42875 times)

doublej

doublej

doublej

doublej

doublej

wazza

doublej

doublej

xr6jeeper

xr6jeeper

doublej

doublej

king cj