Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: PINION SHAFT SEAL  (Read 1784 times)

0 Members and 1 Guest are viewing this topic.

neilhull

  • Guest
PINION SHAFT SEAL
« on: June 14, 2009, 10:09:05 AM »

Hi I think the pinion shaft seal is starting to leak on my rear axle  :| . Do i do this the same way i have done other ones
 mark the nut and casing then count the number of turns to take the nut of . Do the seal then put the nut back on the same number of turns . Or is there a different way to do jeep pinion seals  . All advice appreciated  :-)
       cheers NEIL
ps  1997 cherry think its a 44 axle . do  these model have the limited slip diff ?
Logged

neilhull

  • Guest
Re: PINION SHAFT SEAL
« Reply #1 on: July 08, 2009, 08:22:45 PM »

HI No replyes to this come on some body reassure me i am doing the right way
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: PINION SHAFT SEAL
« Reply #2 on: July 08, 2009, 08:37:15 PM »

yup that is deffo the way to do it use a spot of thread lock when you put the nut back on so it cant back off
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
Re: PINION SHAFT SEAL
« Reply #3 on: July 08, 2009, 10:58:30 PM »

 :imwitstupid: and it is a d 35 axle you have if it is factory just so ya dont order the wrong part. :greggmo:
Logged

Green Jeep

  • Guest
Re: PINION SHAFT SEAL
« Reply #4 on: July 09, 2009, 07:04:38 AM »

Yeah not a hard job, lining up the new seal so its 'square' when it goes back in... think I used a 50mm core drill bit to push it even evenly.

You should have a Dana 35 on the rear and most have LSD, if your changing your fluid at the same time (worth doing) then don't forget the LSD additive or the LSD wont work and bind up.

Cheers Maf
Logged

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: PINION SHAFT SEAL
« Reply #5 on: July 09, 2009, 01:44:23 PM »

IIRC

Petrol 4.0 facelifts don't have LSD
Mk 1 Petrol / Pre facelift & all Diesels do have LSD

No doubt someone with more knowledge will confirm or deny

 
Logged
Taking ya girl to heaven & back

sprintagogo

  • Guest
Re: PINION SHAFT SEAL
« Reply #6 on: July 09, 2009, 02:00:11 PM »

IIRC

Petrol 4.0 facelifts don't have LSD
Mk 1 Petrol / Pre facelift & all Diesels do have LSD

No doubt someone with more knowledge will confirm or deny

 

Not more knowledge but just to contradict....

My 2000 year 4ltr auto classic had the traclok rear LSD from the factory, it's listed on the build sheet as well. I don't know if this was specced as an optional extra by the original purchaser or a standard item. It could have been optional as I also have leather and the brochure I have for that model year suggests I should have cloth seats?
Logged

neilhull

  • Guest
Re: PINION SHAFT SEAL
« Reply #7 on: July 10, 2009, 09:48:17 PM »

thanks chaps :jump_125: will now do this asap . RE l.s.d will it matter if i put  the additive  in
   cheers NEIL
Logged

wazza

  • Guest
Re: PINION SHAFT SEAL
« Reply #8 on: July 11, 2009, 09:53:39 AM »

yep, you definately need to put it in!!!! if not then your lsd will wear out very fast an then cost you a hell of a lot more!!!! its only about 4 quid from the dealer.
Logged

sprintagogo

  • Guest
Re: PINION SHAFT SEAL
« Reply #9 on: July 11, 2009, 09:59:39 AM »

RE l.s.d will it matter if i put  the additive  in
   cheers NEIL

If you are not sure if you have the LSD or not, then for £4, just putting the additive in anyway is cheap insurance and it will do no harm if you don't actually have the LSD unit.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal