Topic: Tj Bulkhead (Read 1136 times)

willo · « **on:** January 15, 2011, 09:52:58 PM »

Right, I need to fit a bulkhead of some sort behind the front seats in my TJ to comply with some rules and regs of an event I am intending on doing.
I have read a thread on here about a similar idea, however I wondered if anyone had done anything else?

I am aware of :http://www.gr8tops.com/index.php?option=com_content&view=article&id=60&Itemid=104

Bubba · « **Reply #1 on:** January 15, 2011, 10:00:45 PM »

what event and why

isle of man · « **Reply #2 on:** January 15, 2011, 10:03:44 PM »

Will be the new MSA reg's

willo · « **Reply #3 on:** January 15, 2011, 10:09:48 PM »

It may or may not be the new msa regs, but it states that the front and back of the vehicle must be separated by some form of bulkhead. Presumably to prevent gear thats not locked down from hitting you

Item 9 under Body & Chassis
http://www.4x4adventures.co.uk/_main/winch_challenge_event_rules_and_regs.htm

isle of man · « **Reply #4 on:** January 15, 2011, 10:29:45 PM »

looks like MSA - why not just put a cargo net up for the divider?

willo · « **Reply #5 on:** January 15, 2011, 11:05:01 PM »

yes, I could do, however I would quite like a permanent bulkhead so I could run the jeep without the rear tonneau cover that I currently have. There are loads of boat builders down my way, so I may end up with something composite that will fit the hole

Bishops Finger · « **Reply #6 on:** January 15, 2011, 11:17:57 PM »

That sounds like a 9 year old transit...

Author Topic: Tj Bulkhead (Read 1136 times)

willo

Tj Bulkhead

Bubba

Re: Tj Bulkhead

isle of man

Re: Tj Bulkhead

willo

Re: Tj Bulkhead

isle of man

Re: Tj Bulkhead

willo

Re: Tj Bulkhead

Bishops Finger

Re: Tj Bulkhead