Topic: Front Propshaft vibration (Read 942 times)

Longjon · « **on:** January 16, 2011, 10:00:05 PM »

I have a 2.7crd WJ GC, when i bought the car the seller said there was a vibration from the front prop shaft, so removed it, without marking it in relation to the flanges on the front diff or TC. I have refitted the shaft and the vibration is there, am i right in thinking that these have to be refitted in a way that both the front and rear cv/uj joints on the shaft have to run in parrallel. The shaft rumbles aswell. Is it just a case of unbolting one end and rotating 90 degrees.

Thanks

Also how easy is it to change the engine thermostat on this car mine is stuck open

isle of man · « **Reply #1 on:** January 16, 2011, 10:15:22 PM »

It's possible you have a sized joint on the prop.

Dave69 · « **Reply #2 on:** January 17, 2011, 08:32:49 PM »

as above

prop alignment not realy an issue

DarrenR · « **Reply #3 on:** January 17, 2011, 09:58:43 PM »

They are cv joints, I think knackered transfer case or front diff

Author Topic: Front Propshaft vibration (Read 942 times)

Longjon

Front Propshaft vibration

isle of man

Re: Front Propshaft vibration

Dave69

Re: Front Propshaft vibration

DarrenR

Re: Front Propshaft vibration