Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Jeep Grand Cherokeen WK1 3.0 CRD engine revs issue  (Read 1878 times)

0 Members and 1 Guest are viewing this topic.

macabethiele

  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 111
  • Vehicle: Jeep Grand Cherokee
  • Year: 2005
Jeep Grand Cherokeen WK1 3.0 CRD engine revs issue
« on: January 20, 2021, 09:53:37 PM »

Today when I drove my Jeep it was as if the cruise control was on all the time as the vehicle did not slow down much on the over run.
When in Neutral if I revved the engine the revs would climb easily to 2500-3000 rpm but would take up to 20 seconds to fall to a 1000 rpm then a while longer to normal idle speed. It was as if the throttle cable was sticking. It was a bit tricky reversing it up my driveway as the revs were so unpredictable.

Any ideas where to start looking at the cause?
Logged
Jeep WK 2.7 CRD
Jeep WJ 3.0 CRD
R129 SL 500

XJ Fan

  • Regular Member
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 939
  • Vehicle: XJ TD
  • Year: 2001
  • nulla tenaci invia est via
Re: Jeep Grand Cherokeen WK1 3.0 CRD engine revs issue
« Reply #1 on: January 21, 2021, 09:27:30 AM »

First thoughts are sticking throttle body/butterfly/cable. Check and lubricate.
Start the car, open your bonnet, and try to replicate the issue by manually adjusting the cable, and see what you can see.
Logged
'94 mk1 XJ 2.5 TD (dead)
'01 mk2 XJ 2.5 TD (my daily drive)
'97 ZJ 4.0 limited (dead)
Pages: [1]   Go Up
 

Powered by EzPortal