Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: how do you get to that last friggin bolt  (Read 2030 times)

0 Members and 1 Guest are viewing this topic.

249raf

  • Guest
how do you get to that last friggin bolt
« on: October 19, 2009, 10:56:43 PM »

Hi Guys

Im trying to remove the radiator from my YJ

Looking from the front of the jeep how do you get to the bolt near the bottom holding the rad to the chassis, its driving me mad, you would have throught they would have left a hole on the back plate so you could poke a socket set through but no, they didnt.

Its a job making me crazy i tell you.....................

Any help or thoughts could help me regain sanity
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
Re: how do you get to that last friggin bolt
« Reply #1 on: October 19, 2009, 11:38:36 PM »

are you takin the rad out or the hole grill? there should be only 4 bolts holding the rad in on a yj.
Logged

249raf

  • Guest
Re: how do you get to that last friggin bolt
« Reply #2 on: October 20, 2009, 06:00:51 PM »

Hiya

Yes im trying to replace the rad with a new one, there are two bolts on the top brackets and then four bolts (2 either side) on the rad itself that attached it to some metal straps that run behind the grill. On the right side of the radiator

Logged

scotty

  • Guest
Re: how do you get to that last friggin bolt
« Reply #3 on: October 20, 2009, 07:44:51 PM »

gas axe!!!!


scotty
Logged

249raf

  • Guest
Re: how do you get to that last friggin bolt
« Reply #4 on: October 20, 2009, 08:01:25 PM »

thanks mate thats really helpful lol
Logged

Tragic

  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 843
  • Vehicle: A proper Jeep!
  • Year: 1993
Re: how do you get to that last friggin bolt
« Reply #5 on: October 20, 2009, 08:09:39 PM »

I use a 1/4" drive ratchet with a stubby socket. And a spanner will get in there.

But if you are removing it to fit a new radiator, why not just bend/cut/butcher the offending metalwork to get to the bolt?
Logged

Shrimpton

  • Guest
Re: how do you get to that last friggin bolt
« Reply #6 on: October 20, 2009, 10:07:01 PM »

Logged

249raf

  • Guest
Re: how do you get to that last friggin bolt
« Reply #7 on: October 21, 2009, 07:04:42 PM »

Thanks mate, i have a compressor at the office so ill buy that and give it a whirl (literally)

ian
Logged

doublej

  • Guest
Re: how do you get to that last friggin bolt
« Reply #8 on: October 22, 2009, 09:28:31 PM »

all you need is a wrench mate, just a wrench
Logged
Pages: [1]   Go Up
 

Powered by EzPortal