Topic: parts from the states (Read 46047 times)

trent · « **Reply #50 on:** December 23, 2004, 10:48:28 PM »

Me too!!!!!!!

Bubba · « **Reply #51 on:** December 24, 2004, 11:25:25 AM »

juust been checking out quadratec on line and must say that apart from one or two thing that 4wd dont sell that they are dearer on like for like parts so i for one will still bring my own parts in from the states steve an nsn may well be a good guy and try his best to provide good service and prices but the poor chap still has to make a living so if his us part suplyer is slightly dearer so must be the end price wich is a shame as we are desperatly short of good parts suplyers in this country evan lighthouse parts seem to be getting dearer :cry:

Anonymous · « **Reply #52 on:** December 24, 2004, 09:29:26 PM »

I agree about lighthouse,my new hubs cost £138 if i wasn't in a rush i would have had them from 4wd around £100 including shipping.

greggmo · « **Reply #53 on:** December 24, 2004, 11:12:50 PM »

its true what you boyz say, the only way that anyone could compare to ordering from the states would be to start manufacturing the stuff or find some way of buying direct from the makers in real large quantaties. 4wd and companies like them are hard to beat for price and service. :smt102

Anonymous · « **Reply #54 on:** December 26, 2004, 08:46:25 PM »

I have to agree :lol:

Mick O · « **Reply #55 on:** December 28, 2004, 10:37:45 AM »

Hey Blue

Heres an idea

bluesub · « **Reply #56 on:** December 28, 2004, 11:09:13 AM »

Thanks go to Woody and Mick O for the links :lol:

I think a front receiver hitch is probably the way I will go. :yawinkle:

daggie · « **Reply #57 on:** December 28, 2004, 03:49:06 PM »

bluesub
I have a drawtite on the front of mine, I'll email you a pic.

daggie · « **Reply #58 on:** December 29, 2004, 01:57:52 PM »

Bluesub,
you have mail

bluesub · « **Reply #59 on:** December 29, 2004, 09:20:17 PM »

Cheers Daggie :wink:

Will get some prices and also look at the possibility of self fabrication

daggie · « **Reply #60 on:** December 30, 2004, 09:38:07 AM »

Bluesub

I considered making my own, but the drawtite hitch is rated at 9000lb pull rate, so god forbid, any recovery should go horribly wrong in which somebody gets hurt or worse,:( at least you will be covered by the manufacturers warranty to a certian extent
Mine cost 180 squids all in, not bad IMHO

The locking pin was £22
The 2" shackle & reciever £40 ish

46stm · « **Reply #61 on:** January 04, 2005, 01:18:12 PM »

Ref the Hubs....I have 2 left and selling them for £119 each (plus vat, which everyone puts on, including USA)

I would bulk buy anything and make it worthwhile for everyone (me included) but I've tried it on a couple of things and the response is crap.....plenty of talk but no real commitment so unfortunaely these things do fail.

Mike Pavelin · « **Reply #62 on:** January 04, 2005, 01:56:42 PM »

That's the cheapest I've seen hubs for over here, and from stock, too. Worth buying in advance for spares I'd say. At the end of the day it's all very well gettting stuff from the US to save some dosh, but it 'aint no good if you're off the road for a week and you need your ride to get to work or something.

Bubba · « **Reply #63 on:** January 04, 2005, 10:23:30 PM »

are we talkin cj hubs or them crudy hubs for tjs they seem to wear out faster than the light on my fridge door [wich dont take long] :toimonster:

Anonymous · « **Reply #64 on:** January 04, 2005, 11:48:37 PM »

If Dr Mike and that strange guy from Essex who says nerf bars are easy to fit are on the case bet club/group deals can be sort

ted

Mike Pavelin · « **Reply #65 on:** January 05, 2005, 08:53:25 AM »

Tj ones, But at least they don't rust as fast as a CJ :lol:

greggmo · « **Reply #66 on:** January 05, 2005, 07:12:39 PM »

well shep is having to replace his and they arnt very old at all. him not happy. we have an 83 cj and its like new, all it needs is a wheel cylinder. new things are deer and made from crap, its true.

Bubba · « **Reply #67 on:** January 05, 2005, 08:13:19 PM »

dont want be nasty but i do have 4 cjs at the mo and no rusty hubs or bearings but i will say the amc twenty under the back is a basterd to work on :pokinit:

Tank · « **Reply #68 on:** January 06, 2005, 04:56:58 PM »

YYYEEEEEEEHHHHHHAAAAAAA!!!!!!! My things have finally arrived from the states and i was very suprised as they came to the door with no extra to pay-what a result.Now all i need is one or more very kind and willing Dastards to help me fit everything.Any volunteers out there :?: :?:

Tank · « **Reply #69 on:** January 06, 2005, 05:00:22 PM »

Oh and just to jog the memory,i bought a winch bumper,fender extension flares and some side bars,and i also have a winch to go onto the bumper,so i reckon at least a days work if i did it on my own but as they say,many hands make light work(no comments about too many cooks please :lol: ).

greggmo · « **Reply #70 on:** January 06, 2005, 08:19:41 PM »

count me in mate, always willing to help if i can. :smt039

Bubba · « **Reply #71 on:** January 06, 2005, 08:52:00 PM »

me three

Tank · « **Reply #72 on:** January 06, 2005, 10:39:46 PM »

Thanks very much Bubba and Greggmo for the kind offers.When would be the best times to do it and wheres the best place to do it?Maybe at yours Bubba if thats ok with you,depending upon whats in your garage at the moment ,of course, as you have cover,whereas i dont as my garage is rather full at the moment with a half stripped cherry as you probably know.As far as im concerned,the sooner the better,but it all depends upon your availability my fellow Dastards(the missus is moaning about all these big cardboard boxes cluttering the place up :? :? :? )

greggmo · « **Reply #73 on:** January 06, 2005, 11:29:11 PM »

bit busy this weekend but next weekend is fairly free i think, anyway its up to you guyz. keep us posted.

Anonymous · « **Reply #74 on:** January 08, 2005, 01:58:39 PM »

I will come over if i am free. Dont know if i will be much help though :roll:

Author Topic: parts from the states (Read 46047 times)

Anonymous

Anonymous

46stm

Mike Pavelin

Anonymous

Mike Pavelin

Tank

Tank

Tank

Anonymous