Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Uncas on September 28, 2015, 11:13:55 AM
-
Hiya all I've just bought a Yj that requires a bit of tlc on checking round it I found that none of the indicators work even on 4 way flash and I've no brake lights. I've checked the fuses all are ok and I've pulled the yellow relay is there another relay that I should be looking for? Is there any other connection between the brake lights and the indicators? I'll start looking at the earth points this afternoon.
Uncas
-
Look at the light earthing points for corrosion as a starter.
Also you could check the voltage to the lights using a multimeter
-
Well that's the indicators fixed courtesy of a new flasher relay from Lighthouse Jeep. If the rain holds of I'll check the brake lights out later on this week. I suspect that it will be the switch which looks like a swine to get to. I've already checked the fuses and the bulbs.
Uncas