Topic: CJ7 fuel vapour venting (Read 1540 times)

johnnyboy · « **on:** November 21, 2016, 12:30:36 PM »

Hi.

My 4.2CJ has vapour vent pipes running from the tank to a "liquid check valve" then a "rollover check valve" (both in the back left corner), then off to a charcoal canister the engine bay and then to the carburettor.....

I understand that this was mostly for 1970's California emissions laws and I would like to simplify it all... (though something to stop petrol running out if I make it fall over still sounds like a good idea...)
What do I need to do? Can I just throw it all away? What are the issues?

djrr6 · « **Reply #1 on:** November 21, 2016, 06:22:32 PM »

I had same issue and read a few different rebuilds and took advice from long term owners on here and it would seem the charcoal canister and the rest is pretty much an 'addition' to suit California and can be removed

I have taken the two vents to a stainless steel roll over and then vent from that to atmosphere

Dave The Sparky · « **Reply #2 on:** November 21, 2016, 06:52:46 PM »

I bought a vented cap from Rock and binned all the charcoal nonsense.

djrr6 · « **Reply #3 on:** November 21, 2016, 07:47:15 PM »

https://www.ebay.co.uk/itm/151345690676

Dave69 · « **Reply #4 on:** November 23, 2016, 10:16:21 PM »

got none of that stuff on my jeep.

YJ filler neck with the screw filler cap waiting to be swapped over should stop the smell of petrol when you accelerate with a full tank of fuel

Author Topic: CJ7 fuel vapour venting (Read 1540 times)

johnnyboy

CJ7 fuel vapour venting

djrr6

Re: CJ7 fuel vapour venting

Dave The Sparky

Re: CJ7 fuel vapour venting

djrr6

Re: CJ7 fuel vapour venting

Dave69

Re: CJ7 fuel vapour venting