Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: mattyspr on August 09, 2009, 09:32:28 PM
-
Hi All.
New Jeep owner here. Just picked up my first Cherry today. Its a 96 P reg 2.5TD Limited. A few niggles I'll be needing help with.
When operating the central Locking, the 2 doors on the drivers side dont lock. The 2 passenger doors and tailgate work but not the drivers side doors. Is there anything I need to be looking at to help put right?
Cheers all
Matt
-
Maybe a connection in the drivers door???
-
good chance its in the door there is a module in the drivers door i think
-
tell you an old gag i do remember if its the locking module in the door, disconnect the batt and leave for a couple of minutes to let everything reset then bung it back on and see if the module resets itself.
if you have any trouble matty, gimmie a ring and happy jeepin. :imwitstupid:
-
No door module in an XJ, it'll probably be a broken wire.
-
sorry folks i done got it wrong :jpshakehead:
-
http://www.birtydastards.com/frm/index.php?topic=10576.0 (http://www.birtydastards.com/frm/index.php?topic=10576.0)
matty read this mate. i think it'll help.