Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: BOP on January 04, 2010, 12:37:10 PM

Title: hmmmm,how do I?
Post by: BOP on January 04, 2010, 12:37:10 PM

Anybody got any tips on how to undo and remove the bolts holding the crank position sensor on my 1998 4L cherokee as I'm having a nightmare! I can just about get to the bolts but space is so tight due to the bell housing/transmission being so close to the footwell that I cant undo the bolts! tried spanner and different combinations of extension bar-knuckle-socket but to no avail! I'm stumped! :017: and cold, back to using motorbike for work in mornings due to cherry not working! -5 when I left this morning :010:

Title: Re: hmmmm,how do I?
Post by: scrw on January 04, 2010, 01:24:03 PM

drop the front prop at the TC end, and use about 2 foot of extention bar with a UJ at the socket end, is a PITA

Title: Re: hmmmm,how do I?
Post by: BOP on January 04, 2010, 04:27:41 PM

Quote from: scrw on January 04, 2010, 01:24:03 PM

drop the front prop at the TC end, and use about 2 foot of extention bar with a UJ at the socket end, is a PITA

Thanks Steve! :icon_biggrin: