Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Invicta on January 17, 2010, 03:05:50 PM

Title: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Invicta on January 17, 2010, 03:05:50 PM
I'm thinking of altering the shroud to make it easier to refit and would appreciate people's views.

As refitting the shroud means removing the radiator, hoses & fan I am thinking of cutting the shroud into 4.
Making clips and using self tapping screws to fit them back together.
This would mean I could refit the shroud without taking the other bits off.

Any thoughts folks?

Bernard
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Bubba on January 17, 2010, 05:14:09 PM
works for me
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Dave69 on January 18, 2010, 02:56:52 PM
a shroud doesn't have to be a 1 piece item. as long as it is surrounding the fan and the joints are close together then there should be no real problem.
pre-production units are normally made up of more than 1 piece and gaffer taped together. but gaffer tape is not a permenant solution :hysterical:
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Invicta on January 27, 2010, 06:14:40 PM
Dave & Bubba,

I managed with just 1 join - the jobs a good'un.
I was surprised at the difference in air flow once the shroud was back on so it was definetly worth doing.

I also found that by undoing 3 bolts each side the whole of the front comes away pity I didn't spot this first time round.

Bernard
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Nosebolt on January 27, 2010, 06:16:13 PM
 :ttiwwp:
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: The Smiths on January 27, 2010, 06:38:16 PM
Had to do similar on mine - after fan came off and smashed in to pieces - makes it so much easier to get in to do stuff - as on the diesel aircon needs degassing to get in fully

(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fi219.photobucket.com%2Falbums%2Fcc124%2Fmds-houses%2Fjeep%2Fcherry%2FS1053623.jpg&hash=4aa66a04c0e757266c6299fc1d72bf98ef7856ba)

(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fi219.photobucket.com%2Falbums%2Fcc124%2Fmds-houses%2Fjeep%2Fcherry%2FS1053620.jpg&hash=a4ba309d52dc345ce689f1dd94a10dfda119ac99)
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Dave69 on January 28, 2010, 12:48:44 PM
Dave & Bubba,

I managed with just 1 join - the jobs a good'un.
I was surprised at the difference in air flow once the shroud was back on so it was definetly worth doing.

I also found that by undoing 3 bolts each side the whole of the front comes away pity I didn't spot this first time round.

Bernard

this is what the fan should be doing and you have got it wright,

L/R tried to do away with a shroud on the new disco's but then realised the cooling was reduced dramatically
Title: Re: Fan Shroud modification 1975 Mitsubishi J26 Jeep
Post by: Bubba on January 28, 2010, 05:56:53 PM
thick twats