Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Anonymous on October 03, 2005, 09:40:43 PM

Title: Stew's 2" Lift Spacers
Post by: Anonymous on October 03, 2005, 09:40:43 PM
Quick question, will standard springs on a TJ dislocate if using 2" spacer blocks and discos?
Just organised doing Stew's lift but need to know if the spacers need tie wrapping/bolting in or if they will stay put?

cheers


BTW Stew is doing his best to drink Cornwall dry on his hols   :shock:
Title:
Post by: isle of man on October 03, 2005, 09:47:33 PM
i have fitted spacers on a wrangler some time ago i admit but i seem to remember that they fitted on the top of the springs and the rubber kept them in place. could be wrong!!! the spring clip is on the bottom perch. this i know for sure.
what about those a.c.o.s things?

peter henry
Title:
Post by: greggmo on October 03, 2005, 10:06:34 PM
they will stay in place mate. when we took em off mandas buggy we had to beat the crap out of them. they are a tight fit over the bump stop (front) and  a tight fit on the bottom on the rear. never seen em unseat either. 8)
Title:
Post by: Anonymous on October 03, 2005, 10:09:17 PM
good-o, will dust off the spring compresors and the lump hammer then  :wink:
Title:
Post by: greggmo on October 03, 2005, 10:12:25 PM
cool just dont let him loose with em. he will probably end up with a spring up his nose or somethin. :lol:
Title:
Post by: Anonymous on October 03, 2005, 10:36:29 PM
:rotflmao:
Title:
Post by: greggmo on October 03, 2005, 10:42:54 PM
you got it. :smt101
Title:
Post by: Anonymous on October 07, 2005, 11:15:23 PM
Tis a true Birty thing that you folk can sort out my TJ lift and slag me off while Im away :D