Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: scrw on August 06, 2011, 11:39:01 AM
-
Anyone done it (Daggie??) How easy, what used, pictures etc etc etc.
may have a plan
-
:003: you called :003:
basically, I cut a 50mm slot out of the sills, then measured the depth + how much you want as a tree slider off the top of me head 180mm x 50mm with 5mm wall box section.
seam welded top and bottom and plug weled from the inner sill
-
lard and i cut the whole thing back to the false chassis seem and fitted 100 x 100 box in to the whole the top was cut from the top left the flat area of the door closure and we sliced from the drop point
-
Cheers for that. Something for my fabricator to look at.
-
100x100 works a treat. we did Mr Jones's and teds both worked very well.