Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: scrw on August 13, 2011, 04:09:07 PM
-
There is a shiney bit on Stew's Jeep!! p.o.p. install, even Stew has done 1! 4x 10mm bolts to remove/replace
(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fi457.photobucket.com%2Falbums%2Fqq300%2Foffroading%2FJeep%2FIMAG0656.jpg&hash=d3cc02450fc4f8f166201cbedd293d953f374635)
(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fi457.photobucket.com%2Falbums%2Fqq300%2Foffroading%2FJeep%2FIMAG0655.jpg&hash=02a29e46b7673b137a7c4eb28f3884cdfc3a6f3c)
They are not listed as fitting a WJ 4litre, but i think they will, off to try now.
-
All went well..thanks Scrw..we even managed 3 lanes
-
that complicated to fit then :icon_biggrin:
-
how much differace dose it make?
-
psycological or real?
-
meant to improve mid range torque. I have just fitted one to the WJ witha TB rebore to match the spacer, off for a drive in a sec to test, revs much better now though.
-
dyno results here http://jeep-xj.info/HowtoTBspacer.htm (http://jeep-xj.info/HowtoTBspacer.htm)
-
dyno results here http://jeep-xj.info/HowtoTBspacer.htm (http://jeep-xj.info/HowtoTBspacer.htm)
Thats all good then... I take it even more on a 4 litre? :icon_winkle:
-
dyno results here http://jeep-xj.info/HowtoTBspacer.htm (http://jeep-xj.info/HowtoTBspacer.htm)
Thats all good then... I take it even more on a 4 litre? :icon_winkle:
that is on a 4 litre, results at the rear wheels not at the flywheel hence lower figures
-
5-6 HP gain would be hardly noticable, a torque figure comparison would be more relevant