Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Rikk on December 23, 2005, 10:24:12 AM

Title: Cable Run Question
Post by: Rikk on December 23, 2005, 10:24:12 AM
Waaa Waaa Waaa /que incoming dumb question alert :umn:

CB aerials, I have it mounted on the bonnet and previously being the slack lazy git I am just run the cable in through the door. This worked well till the first big rain came and I had my own hot tub in the passenger footwell.

Soooo, where/how do I run a cable in through the bulhead? are there holes tucked away that can be used or is it a case of punching a hole through one of the rubber gaskets that other cables go through in pokeing it in there??


               ...........Rikk
Title:
Post by: Mike Pavelin on December 23, 2005, 02:15:14 PM
Follow the wiring for the radio aerial through the driver's kick panel out under the RH front wing area behind the plastic splash guard.
Title:
Post by: Bubba on December 24, 2005, 10:18:25 AM
or drill a hole in the wndscreen :twisted:
Title:
Post by: Rikk on December 24, 2005, 10:30:27 AM
It's a close thing, but after checking around for drills I can use on glass I think I'll go with Mikes suggestion ;)

Cheers

            .......Rikk