Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Dave69 on October 04, 2011, 08:04:19 PM

Title: cherokee NSS
Post by: Dave69 on October 04, 2011, 08:04:19 PM

an tips on removing the NSS from the cherokee gearbox, after it has been soaked with oil and still not moving

Title: Re: cherokee NSS
Post by: JamesH on October 04, 2011, 08:25:10 PM

http://www.go.jeep-xj.info/HowtoNSSrebuild.htm (http://www.go.jeep-xj.info/HowtoNSSrebuild.htm)

Be careful, there's some delicate cast aluminium parts.

Title: Re: cherokee NSS
Post by: Panic mechanic! on October 05, 2011, 12:09:11 AM

Quote from: Dave69 on October 04, 2011, 08:04:19 PM

an tips on removing the NSS from the cherokee gearbox, after it has been soaked with oil and still not moving

show it a piccie of BD that should get it off and running straight away.......

Title: Re: cherokee NSS
Post by: Dave69 on October 05, 2011, 07:10:44 AM

the misleading article on the go-jeep site mentions using the main 28mm nut to pry against with the screwdriver to enable the release of the NSS, the nut is only there to hold it in place on the keywayed shaft so not sure of the relevance to that procedure

Title: Re: cherokee NSS
Post by: JamesH on October 05, 2011, 12:18:20 PM

Worked ok on mine but maybe there are some difference between the years? It's been  while since I did mine so the memory is gone.