Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Bishops Finger on April 13, 2012, 05:14:11 PM

Title: Disconnects
Post by: Bishops Finger on April 13, 2012, 05:14:11 PM

How do you undo tie up and reconnect rough country disconnects?

Title: Re: Disconnects
Post by: MOCAJ on April 13, 2012, 05:49:09 PM

angle grinder and wool and dont forget to wear safety glasses, gloves and a helmet as you have never done it before in this place  :banghead:

Title: Re: Disconnects
Post by: scrw on April 13, 2012, 05:55:39 PM

 :hysterical:

Title: Re: Disconnects
Post by: Dave69 on April 13, 2012, 06:21:26 PM

grind the whole lot off and buy jks

Title: Re: Disconnects
Post by: Warthog on April 13, 2012, 07:02:10 PM

Quote from: my other cars a jeep on April 13, 2012, 05:49:09 PM

angle grinder and wool and dont forget to wear safety glasses, gloves and a helmet as you have never done it before in this place  :banghead:

 :hysterical:

Would check that the Angle Grinder has been PAT Tested?
Lone working procedure, may need to be addressed and undertaken?
Risk assessment for sure!

Safety First

Title: Re: Disconnects
Post by: Bishops Finger on April 15, 2012, 12:50:25 AM

Bunch of morons...they are attached to the truck already...

Title: Re: Disconnects
Post by: greggmo on April 15, 2012, 09:15:18 AM

If in public dont forget your hot works permit.

Title: Re: Disconnects
Post by: bigjeepzj on April 15, 2012, 09:52:49 AM

only 110v tools can be use on a work site

Title: Re: Disconnects
Post by: Dave69 on April 15, 2012, 02:09:49 PM

or just pay someone else to fix it

Title: Re: Disconnects
Post by: Bishops Finger on April 16, 2012, 03:23:30 PM

Or use the internet...and safety boots :hysterical: