Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Dutch on July 08, 2012, 05:17:38 PM
-
Removed starter motor and cleaned. Removed back plate and had a peek in the brush department, all good.
Hooked motor up to spare battery and motor went round :023:
Did a bit of reading on tinternet by googeling starter motor no worky .... yada.... yada... :icon_rolleyes:
Check earth cable (can be duff) so re-installed starter and rigged additional earth jump lead....... fired.....no go :icon_sad:
Since I've got such a strong clunc from the starter solenoid when turning the key, fiddled around with the nut on the feed from solenoid to starter ...........
and .....lift off :icon_super: :icon_super: :icon_super:
that fookin simple ...nut off ....nut on ... go :icon_redface:
Top tip : check/clean your leccy connections before running off to the starter motor chap
-
Result.. :icon_super:.. :icon_jook:
-
Nice one Dutch, aint it great when its simple :icon_super:
I'll take simple & feeling a bit of a dullard every time mate :003:
-
As I said...
-
well done.. but how am i going to work off my fry ups now :icon_biggrin:
-
That's awesome - good to hear!! :icon_super:
-
Sorry i missed this post, Nice one Dutch old buddy old pal, you can remove the strop off the front of Blue now, save everyone haulin ya ass about :003:
-
save everyone haulin ya ass about :003:
Ya loved every minute of it .... hooking up that big ass WJ :hysterical: