Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: bunnykins on July 08, 2012, 08:57:41 PM
-
my jeep has been going well with no problems for awhile and also passed its MOT last month :grin:
this is a common problem on mine - after sometime it wont start so i do my usual - take door card off, disconnect door module then it will start and should be okay
but this time after doing that, it stalled twice on a short trip, but started ok and i got home.
i notice that when i start it, it seems to knock for awhile but on 2nd turn of key it does start.
anyone come across this before or think they know what it is ? is it the coil/plugs/points need cleaning ?
thanks in advance.
-
CPS.
-
May not be.....any alarm issues....
-
Did you clean the connections to the module before you reconnected it?
-
Did you clean the connections to the module before you reconnected it?
what do you normally use to clean the connectors ? do i use WD40s ?
-
NO never use that on contacts
u need some contact cleaner
http://www.ebay.co.uk/itm/electrical-contact-cleaner-spray-500ml-/380382362481?pt=UK_Car_Accessories_Car_Care_Cleaning&hash=item58908e3b71#ht_500wt_1180 (http://www.ebay.co.uk/itm/electrical-contact-cleaner-spray-500ml-/380382362481?pt=UK_Car_Accessories_Car_Care_Cleaning&hash=item58908e3b71#ht_500wt_1180)
WD40 as been banned in a lot of safety control industry's as it can make them worse
-
CPS.................. :greggmo:
try pulling codes.............
-
CPS.................. :greggmo:
try pulling codes.............
don't know how to do this.
-
try this link
http://www.nagca.com/grandtech/troubleshootcodes.htm (http://www.nagca.com/grandtech/troubleshootcodes.htm)
also this link may help
http://www.jeepforum.com/forum/f13/1996-jeep-grand-cherokee-limited-crank-position-sensor-700389/ (http://www.jeepforum.com/forum/f13/1996-jeep-grand-cherokee-limited-crank-position-sensor-700389/)
-
try this link
http://www.nagca.com/grandtech/troubleshootcodes.htm (http://www.nagca.com/grandtech/troubleshootcodes.htm)
also this link may help
http://www.jeepforum.com/forum/f13/1996-jeep-grand-cherokee-limited-crank-position-sensor-700389/ (http://www.jeepforum.com/forum/f13/1996-jeep-grand-cherokee-limited-crank-position-sensor-700389/)
thanks for the links, it think that had been replace while back, i'll check the codes thou, not sure if the on/off/on/off will work :)
don't you just hate it when the jeep gremlins strikes :icon_rolleyes: