Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: david.varady on November 17, 2012, 11:43:05 PM

Title: Ax15
Post by: david.varady on November 17, 2012, 11:43:05 PM

My 94 yj is starting to grind pretty bad to go into second gear, was wondering if anyone had a ax15 for sale so I can swap it out? I already checked the clutch and the flywheel to make sure everything works, I'm pretty sure the syncro is going.  :die:

Title: Re: Ax15
Post by: dtooth on November 18, 2012, 09:23:32 AM

the 2.5 deasiel xj has the ax15 in it probably need to swap the bell housing 

Title: Re: Ax15
Post by: Mike Pavelin on November 18, 2012, 06:40:26 PM

Bellhousing is the same as long as you don't have the concentric hydraulic release bearing. Rear housing may have to be swapped to position the T/C correctly.

Title: Re: Ax15
Post by: dieselj20 on November 19, 2012, 10:56:17 AM

  :iagree: rear housing will need changing or drilling

Title: Re: Ax15
Post by: Tragic on November 23, 2012, 08:52:02 PM

Quote from: dieselj20 on November 19, 2012, 10:56:17 AM

  :iagree: rear housing will need changing or drilling

Just use the one off your old box, 6 bolts.

Don't think I've ever actually had a Wrangler box in my YJ, 2 TD Cherry boxes and now a TD ZJ box (and it had a ZJ t-case too until CF11.....  :die:)