Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: daggie on March 09, 2006, 06:30:15 PM

Title: Power steering pump
Post by: daggie on March 09, 2006, 06:30:15 PM
Q for dr Mike, but

Now the p/s pump is fucked on me 2.5 deisel  z/ :giveup:

I need to get the pulley of the shaft, will it come off with a 3 legged puller  :?
or does it require a special tool  :roll:
Title:
Post by: Mike Pavelin on March 09, 2006, 07:22:40 PM
It might do but the proper tool pulls on the flange on the central boss because I believe the pulley is mainly plastic so you could break it. You also have to make a tool to put it back on by using the thread in the middle of the pump shaft to pull the pulley on. If you try to press it on you will break the pump. We used to order a new pulley with the pump to save some hassle.
Title:
Post by: Anonymous on March 09, 2006, 08:09:55 PM
You're playing it cool Mike, havent you got a motor to pack  :lol:
Title:
Post by: daggie on March 09, 2006, 09:02:07 PM
bugger :roll:

Cheers Mike
Title:
Post by: chrisjones on March 09, 2006, 09:03:38 PM
Is it the same pump as on the XJ cos if it is KD might have one.
Title:
Post by: daggie on March 10, 2006, 05:06:57 PM
nope, Chris
totaly different on a diesel  :banghead:  :swearmad:
somebody in their infanite wisdom, decided that the aircon pump would run a lot better if it was connected to the back of the pump, tossers  :smt097
Title:
Post by: chrisjones on March 10, 2006, 05:17:38 PM
Ahhh...rrrssss!