Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Sahara-Paul on March 08, 2013, 03:12:43 PM
-
Just bought the following
(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F13%2F03%2F08%2Fjaje3e2e.jpg&hash=8980244f1ea57b462dfbda99c93184df5a67eea1)
(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F13%2F03%2F08%2Fepu2e7en.jpg&hash=e19a2a0b4352bf3c3caf2c57f14ad0332c06bcba)
to fit to a hard top (when I find one!) any hints or tips in fitting it? I'm going to spray it up. Get the hoops chromed and bond it in place.
Should look good I hope.
-
looks a bit too rounded on the corners to fit without some modding, would have said bond it but not sure you will have enough contact area
-
:imwitstupid: way to much faffing and theres no guarantee that it will stay stuck unless your using some angy glue.
-
I may bolt it and seal the holes . Will see how it fits once I find a hardtop.
-
I will give the 10 minutes on the roof!!!
-
no more nails
-
no more nails
I give up!!!!
-
:hysterical: that was proper funny dood :hysterical:
-
Sorry but I can't picture it with that Pod.
You'll be 'stuck' with it as well or end up with holes in the roof like cop cars if you change your mind.
One option may be to wrap a bracket round and under the roof onto the header rail; provided theres enough gasket give on the hardtop.
-
:iagree:
dump the cowl and fit the lights to a light bar
-
Good idea nosebolt. Will try the cowl and fall back to that idea if it look pants.