Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Roberts588 on March 23, 2013, 09:02:22 PM

Title: Getting Ready for the lift install!
Post by: Roberts588 on March 23, 2013, 09:02:22 PM

Now I've got the rust all sorted its on to the lift and all the other stuff.

Been stock piling a load of stuff over the past couple of weeks and the final piece of the puzzle came today with great surprise, bought a adjustable Track bar kit RHD from Iron Rock off road on the 19th and arrived today plus no import tax! Boom lol

Total parts include:

New leaf springs 5"
RC quick disconnects
RC adjustable lower control arms
RC adjustable upper controls arms
RC 5" springs
RC front and rear shocks
RC shackle relocation kit
RC pin Elimators front and rear
RC steering stabiliser
Alloy axle seals
Stainless steel braid brake lines
IRO adjustable track bar kit
Rock rusher Diff guards Dana30 and Dana35
IRO over the knuckle steering kit
Front Winch bumper from Mike
12000lb super winch
33x12.50x15 Copper STT's
Bushwhacker Wheel arch extensions
Safari snorkel


(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F13%2F03%2F24%2Fbu3esetu.jpg&hash=9b0567a3106fafafb5c7fa5a515b5e1cf785b709)

In a few weeks I'm going to get a Slip yoke kit with upgrade drive shaft.

Going to tackle this lot on Friday.







Sent from my iPad using Tapatalk HD

Title: Re: Getting Ready for the lift install!
Post by: Bulldog67 on March 23, 2013, 11:03:02 PM

sorry dood but we need the finished ......

 :ttiwwp:


roll on next weekend :icon_super:

Title: Re: Getting Ready for the lift install!
Post by: Dodster on March 24, 2013, 12:17:56 PM

Cool... :greggmo:
I would be interested to see how the over knuckle steering set up goes when you get round to it.
cheers.

Title: Re: Getting Ready for the lift install!
Post by: Roberts588 on April 27, 2013, 09:02:53 PM

Right Then Chaps.

I got the tyres on today and had the wheel alignment done. £40 kwik fit and it was all to cock lol

so heres the half finished product...

(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fs21.postimg.org%2F5byh40bkj%2Fimage.jpg&hash=869a346bb0cb5b4539721507f653f83e727c1de3) (http://postimg.org/image/5byh40bkj/)

(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fs17.postimg.org%2Fgawkw80iz%2Fimage_2.jpg&hash=cd22ef85e08671590524790e65d833c76166f5c7) (http://postimg.org/image/gawkw80iz/)

(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fs4.postimg.org%2Fyjogqmsuh%2Fimage_1.jpg&hash=bf33679cdbaf9ea601c487cdf137434454f9152c) (http://postimg.org/image/yjogqmsuh/)

Cheers

Title: Re: Getting Ready for the lift install!
Post by: jay140285 on April 28, 2013, 01:19:28 AM

Fook me that's a tight squeeze on that tralier.

Looks good though.