Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: daggie on April 28, 2013, 01:18:31 PM

Title: stoopid TJ question
Post by: daggie on April 28, 2013, 01:18:31 PM

does the main beam only flash with the lights on
this one I have here, won't "flash" without the lights on  :102:

ta

Title: Re: stoopid TJ question
Post by: MOCAJ on April 28, 2013, 01:31:13 PM

sorry mate, it flashes like normal cars do

try cleaning the switch first, if not replace  :greggmo:

Title: Re: stoopid TJ question
Post by: gazjeep on April 28, 2013, 03:05:35 PM

x 2

Title: Re: stoopid TJ question
Post by: daggie on April 28, 2013, 04:19:18 PM

arse, thought so
another job on the list, then aswell as
front & rear pinion oil seals
radiator
get the gearbox guard off, all six bolts are spinny spin spin  :jpshakehead: so I can,
sort out the t/case linkage, won't go into 4 low,

& it steers like a  :steeringwheel: :icon_eek:

 :lol_hitting:

Title: Re: stoopid TJ question
Post by: Cockney Boy on April 28, 2013, 05:31:46 PM

Dagger, speak to Steve at FTE as he can make some new inserts for the skid plate.

Title: Re: stoopid TJ question
Post by: Jonny Jeep on April 28, 2013, 08:05:54 PM

Blackmagicbrakes.com do replacement nutsert kits for the transfer case skid. You might need to contact them about shipping cost to uk though.

http://shop.blackmagicbrakes.com/Nutsert-Replacement-Kit_c79.htm

Title: Re: stoopid TJ question
Post by: Cockney Boy on April 28, 2013, 08:10:00 PM

The thing with those nutsert s is you need the right tool, anything over 10mm and you need an electric/air insert gun.

But saying that, nice find bud  :icon_super:

Title: Re: stoopid TJ question
Post by: daggie on April 28, 2013, 08:37:04 PM

sawsall and a mig will do me thinks  :003: