Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Dutch on April 18, 2014, 05:53:55 PM
-
Doods,
Got a 10 pin factory plug lurking behind the rear bumper so I have a requirement for :
Jeep grand cherokee WK (2007) rear hitch 10 pin connector wiring harness
Had a google but looks like the proverbial rocking horse poo.
Can the top ebay-googlers have a look and see if this is available?
Thx.
-
What if I buy one of these and cut the US trailer socket off and re-wire to a European 7 pin ?
-
that would work but why not just chop of the plug and connect in directly. :017:
-
I just use the 10pin plug on ours and got an adaptor for when I need to plug a 7pin socket I.
Sent from my iPhone using Tapatalk
-
I just use the 10pin plug on ours and got an adaptor for when I need to plug a 7pin socket I.
that would work but why not just chop of the plug and connect in directly
Jay, can you elaborate ?
So there is a male factory plug lurking behind the bumper - where do you go from there ?
I assumed - Factory (or similar) female to trailer board plug female receiver, yes ?
I read somewhere that the original US spec female receiver is not allowed in UK - and also when you use factory connection a hook-up to the dealer confuser is called for to activate tow-package ?
Big ZJ - good call - hadn't thought of that - Doh! :eusa_doh:
-
Dutch I am away until tomorrow, take a pic of what you have and I will do the same
Sent from my iPhone using Tapatalk
-
Dutch I am away until tomorrow, take a pic of what you have and I will do the same
Sort of you show me yours and I'll show you mine .... sounds dodgy Jizz boy :greddy2smiley:
This is the plug in question and thats all there is.
-
think
these are the plugs
http://docs-europe.electrocomponents.com/webdocs/0f8b/0900766b80f8bac9.pdf
-
if you are going into that plug you will need the relay that goes with it then it will need activating on the system to tell the vehicle it has a towbar, far easier to buy a canbus relay set up from towsure then just wire straight into the lighting.
-
About £17gbp for the adapter!! Have them in stock, but will not ship to MOFO's
-
Awhwww for fucks sake can somebody speak E N G L I S H here. :icon_rolleyes:
IOM makes the most sense, and that's scary :003:
-
Will be home later this afternoon. Will take pics of our set up
Sent from my iPhone using Tapatalk
-
Awhwww for fucks sake can somebody speak E N G L I S H here. :icon_rolleyes:
IOM makes the most sense, and that's scary :003:
Scary but true :hysterical: :hysterical: :hysterical:
-
Looked at mine as pictured (https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F14%2F04%2F22%2F3yde6use.jpg&hash=f5e84a40b4d948cfe39261d48355e3aa29c4f6ec)
Seems there is no plug behind but it's wired straight into the cars wiring from the factory
Sent from my iPhone using Tapatalk
-
Jeep owner for 12 years (see history in signature) but this is first post on here - please be gentle.
Just upgraded to a WK with rear parking sensors and need to fit towbar. Do I have to buy a detachable? I have heard that a regular flange or swan neck towbar will interfere with the sensors.