Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: petethejeep on July 17, 2014, 02:18:58 PM

Title: CRANKSHAFT POSITION SENSOR
Post by: petethejeep on July 17, 2014, 02:18:58 PM

Hello,Hi
Please can anyone help me with the position of the Crankshaft position sensor on my 2.8l crd auto.
Had management light last on last week, did key off/on thing to see codes, then had it read & Crankshaft sensor was what came up on plugging in.Had codes cleared, to see if just a 1 off, obviously not, as same code is showing on display after doing the key in ignition thing. Same symptons as before, so ordered new sensor.
Now wondering whether easy fix I can do, or is it a garage jobby....

Title: Re: CRANKSHAFT POSITION SENSOR
Post by: gazjeep on July 17, 2014, 11:09:35 PM

Should be un-plug old one from wiring & unscrew the sensor from the body as far as I know

Title: Re: CRANKSHAFT POSITION SENSOR
Post by: petethejeep on July 18, 2014, 09:20:50 AM

Any ideas whereabouts it's located???????

Title: Re: CRANKSHAFT POSITION SENSOR
Post by: gazjeep on July 19, 2014, 10:10:18 AM

Bugger, sorry just re-read your post, I was thinking TPS  :banghead:

Use the search on here, its been done before  :icon_winkle:

Title: Re: CRANKSHAFT POSITION SENSOR
Post by: dieselj20 on July 19, 2014, 06:38:05 PM

right hand side rear just above sump rail held in by one 6 mm bolt