Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Jeep07 on April 13, 2016, 02:41:44 PM

Title: JeepTJ 2.5l manifold Studs
Post by: Jeep07 on April 13, 2016, 02:41:44 PM

Hi all,

I have a problem with my jeep, I know it's a common problem but I'm having issues finding what I need. I have a snapped stud in the engine who's I am having removed tomorrow, however I'm struggling to find a replacement stud.

I have searched the Internet and can't seem to find any in the UK, has anyone else had this issue? If so please could you supply with the supplier.

Thanks in advance and sorry if this has been mentioned before but I could not find it anywhere.

Thanks again

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jonny Jeep on April 13, 2016, 10:38:19 PM

The studs are 3/8" UNC/UNF x 1.75"

I've set a reminder alarm for tomorrow when I'll be in work (I'll forget otherwise). If we have any I'll let you know.

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jeep07 on April 14, 2016, 09:24:47 AM

Ok great thanks Jonny, I'll wait to hear from you.

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jonny Jeep on April 14, 2016, 04:19:29 PM

We have only one but it's a bit short at only 1.55" long

Sent from my D5803 using Tapatalk

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jeep07 on April 14, 2016, 08:10:35 PM

No worries Jonny, thanks for your help really appreciate it.

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jonny Jeep on April 14, 2016, 10:21:15 PM

Part number in the 97 parts list is 53010165. The same stud is used on the 4.0L engine and in the 06 parts list the number is 06036193AA. I don't know how far you are from a Jeep dealer (or fiat maybe?) but they may be available still with that newer part number.

If you have a look at the link below the pic (click it) shows the stud has an e-torx at the end for fitting. Maybe the one I found at work will be long enough. PM your address and I'll stick it in the post to you. Got to be worth a try. If it's too short you can always try the number above at a dealers.

Title: Re: JeepTJ 2.5l manifold Studs
Post by: Jeep07 on April 15, 2016, 09:07:40 PM

Hi Jonny,

I phoned a local dealer Fiat and jeep but had no luck, also called a few online jeep specialist but still no luck.
I ended up having to order them from America, should arrive next week Weds hopefully.

Thanks again for being so helpful.