Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: JamesH on April 27, 2016, 09:42:23 AM
-
Just thought I should clean up the brakes as part of working through the YJ and making it road worthy. Rear brakes are Ford Explorer system from what I can tell and what Simon told me when I bought it.
To save a really long story, see the picture - n/s rear disc is fooked. I guess maybe it seized on and the force from a locker and D60 meant the brake disc was the bit that broke.
My problem - need to find a Ford Explorer rear disc that is drilled for 5 on 5.5" CJ bolt pattern. Dynatrac aren't interested in helping because it's an old axle not in their current range (all aimed at JKs) and their brakes are different now. Currie do make some but shipping a brake disc from California seems a bit silly and they are Currie prices.
Can anyone help by saying what else I might find this disc on?
I can re-drill a standard 5 on 4.5" one but that's my second choice really.
-
As far as I know they are all redrilled anyway. Would go with option 2 and drill it yourself. The disc is the same as most Jeep rears so you can get one local.
I just scrapped two since I have changed the rear again because the hand brake.
-
Thanks Delk. I thought maybe I'd save myself another job and just buy discs that were ready to fit.
I've re-drilled discs before and think I'll end up doing these too.
-
Have a search on the interweb for Suzuki brake discs, you might strike lucky. early non vented Vitara front discs maybe?
-
Apart from CJs other cars with 5 x 5.5 wheels are Suzuki SJ and Vitara, Daihatsu Fourtrak, Kia Sorrento, is it worth going down the local factors and seeing if something works for you?
paul
-
Because it has to fit the rear brake system on the axle I think I'll just get the explorer discs and re-drill them. They are centred with the hub anyway so it's not the trickiest job to drill a slightly bigger 5 hole pattern onto them.
Thanks for the help, I guess I was just hoping for someone to say "buy these, they come dual pattern drilled"
-
The hand brake make them very specific. Suzuki bits don't work.
-
I need some help identifying my front brakes. I believe they are from a pickup or Bronco type vehicle. Can anyone help identify the brake pads below?
The caliper is a big ish single piston caliper and discs are 5 on 5.5" pattern but it could be custom matching or redrilled parts because it's on a custom axle.
I've done quite a bit of Google searching but no luck yet. Any help would be great
(https://birtydastards.com/frm/proxy.php?request=http%3A%2F%2Fi54.photobucket.com%2Falbums%2Fg117%2FEnglishXJ%2Fimage_zpsgblth1wy.jpeg&hash=1446ffb7f07e4f071215791c274246bae18418e9) (http://s54.photobucket.com/user/EnglishXJ/media/image_zpsgblth1wy.jpeg.html)
-
EBay dp1145 pads (do a search and look at the image)- they look like late 70s firebird front pads maybe?
But that's not an expert opinion -just a guess!
-
front fsj pads for 79
-
front fsj pads for 79
:iagree:
-
Excellent, definitely look like they are FSJ pads. I was convinced they were Ford from what Simon mentioned in an email but hey.
Any idea the best place to get replacements? Lighthouse? There don't seem to be any on eBay or the online parts places.
-
The mid 70's Chevy Dana 44 brake pads should be the same as the FSJ ones if it helps for searching.
I have a front Dana 44 with Chevy backing plates, callipers and Ford hub and disc so I get a 5x5.5 bolt pattern.
-
I love this club, mainly for shit like this, the knowledge some of you boys have is brill. :icon_super:
-
i dont know nuthin of nuthin
-
James, have you tried USA automotive over here or even Rockauto now you have more of a clue as to what your after ?
-
This is amazing for sure. I'll order from RockAuto if I can't find some to pickup or do next day. The current discs are as new just grubby and pads are OK after a clean up so I'll order new pads and swap them when they arrive.
Edit: US Automotive have them in stock and I can collect this afternoon. Thanks for the massive help, I've gone from not knowing what the parts were to having a new set ready to fit in the space of a day :greggmo:
-
Excellent, there be some clever buggers around here :icon_super:
I just have experience of buying stuff from different places when the clever buggers tell me what I need :003:
-
I might have some scruffy pads in the garage somewhere that might fit off a wagoneer front axle, could bring them to breakout.
The discs might be Ford but a big brake CJ has similar size discs to an FSJ but 5 x 5.5, got one of them somewhere too for you try if you want.
Real experts may flame me now, just trying to help, and clear out my garage. :greggmo:
-
All sorted now Paul, thanks
-
Well, not quite sorted in turns out. New front calipers ordered, nsf seized on proper tight and was smoking like a demon after a 4 mile drive.
I'm assuming it's just from being stood up and the general lack of fine detail maintenance the Jeep got before it was parked up. Is there anything I should know about these FSJ brakes, are they just typical Jeep brakes that like to seize? They have metal pistons at least rather than bakelite stuff but is it worth having rebuild kits in the spares bag just in case?
I'm not sure the brakes are actually that good for a Jeep this size, my XJ on WJ fronts and Transit rears was better so I feel some mods coming on in the future :icon_rolleyes:
Getting ready for MOT does mean I have a handbrake that works - Jeep novelty!
-
Are you running the YJ servo or the bigger TJ one....????
You've got 37s and some heavyaxles there....
My YJ on 33s would just pass an MOT brake test.
On 35s no way..... Which is why I went with Master Power Brakes Servo.....
Now I know more there are lots of Dodge Ram / F350 upgrades that can be done....Pirate is your friend here....lol
Beware though lots of people can't get them to work.......others reckon they can lock all four 40's at 50mph......guess the devil is in the detail, and the getting the pedal ratio correct which is where most screw up.
You are going to have sooo much fun...... :icon_super:
-
I think these brakes are the biggest likely to fit in the 15" wheel so it's going to have to be servo upgrades I think. its still got a metal brake fluid reservoir and I would have guessed a TJ or WJ upgrade to new servo and master cylinder would have replaced that.
Still so much to learn on this Jeep. Electrics still not 100% and I'm guilty of doing a few workarounds now which isn't going to help :icon_redface:
-
As said I have a similar set up and they work great. Don't know of any issue with the calipers.
The pistons are much bigger so if you have long peddle travel you will need a bigger diameter master cylinder. If it's hard and not stopping well enough you need more pressure from a stronger booster or something.
I when I had a stock tj master with the 1" the peddle travel was really long and didn't flow enough. It worked but was just on the limits. Changed to a big dodge truck one with a 1.25" piston and it works and stops much better and the peddle feel is good. Would like a 1.125" one though as I think it would be a better mix of pressure and travel.
I am running 36 inch tires that are15.5 wide and can lock them up at will.