Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: 83CJ7 on June 07, 2016, 09:11:11 PM

Title: TF999 no throttle linkage
Post by: 83CJ7 on June 07, 2016, 09:11:11 PM

Hi TorqueFlite experts.

My CJ7 has been left without a kickdown linkage since a carb swap a week or so ago.
The installer allowed me to drive away saying that I would survive without a kickdown until we get linkage kit.
However, since experiencing odd transmission behaviour I have read up that this linkage is essential to provide line pressure to the clutches.
Now. Have I smoked my transmission already? Done, maybe, 60 easy miles in this state.
Does manually shifting first to second allow limited driving capability, with decent line pressure, to get it to the tranny engineers?
Can I tie the throttle linkage lever halfway to provide decent line pressure in the box for a while?
Should I not drive it until linkage is in?

Advice appreciated.

Title: Re: TF999 no throttle linkage
Post by: Dave The Sparky on June 07, 2016, 09:50:42 PM

i am no expert but i wouldnt drive it as that linkage needs to be set correctly or you risk burning out the box, but why has the rod gone anyway as its a separately mounted part to the carb and mounted on its own bracket? :017:

Title: Re: TF999 no throttle linkage
Post by: 83CJ7 on June 07, 2016, 10:23:22 PM

Its now a dual carb setup. Entirely different throttle linkage. I'm just waiting on a Lokar kickdown cable kit from Summit.

Title: Re: TF999 no throttle linkage
Post by: Dave The Sparky on June 07, 2016, 11:12:32 PM

I am now intrigued as to what engine you have in there that requires 2 carbs??

Title: Re: TF999 no throttle linkage
Post by: Dave69 on June 08, 2016, 06:27:51 AM

there was an option for a perfomance part supplier who made a a "split" manifold for the straight six which allowed two webber carbs to be installed. Wasnt sold in big numbers and now i believe is not obtainable now.

Title: Re: TF999 no throttle linkage
Post by: wildwood on June 08, 2016, 09:04:46 AM

Couple of 40 IDAs will be fun..... :icon_twisted:

Title: Re: TF999 no throttle linkage
Post by: 83CJ7 on June 08, 2016, 10:04:04 AM

I have a Clifford Performance dual intake with two Weber 38s and Redline throttle linkage.
Also, Clifford dual exhaust headers and custom dual outlet stainless exhaust.

Title: Re: TF999 no throttle linkage
Post by: 83CJ7 on June 08, 2016, 10:04:45 AM

On a stock 258 I6 I should add.

Title: Re: TF999 no throttle linkage
Post by: Dave69 on June 10, 2016, 06:37:37 AM

one of a king intake system, that no one else has copied. looked at it but didnt persue as they are like hens teeth. rumoured to work well.

Post a picture of the installation

Title: Re: TF999 no throttle linkage
Post by: 83CJ7 on June 15, 2016, 03:07:15 PM

Here are the carbs....

Title: Re: TF999 no throttle linkage
Post by: wildwood on June 15, 2016, 03:18:35 PM

Very nice.....that'll have an epic induction roar....sucking in squirrels and small children. :icon_super:

Title: Re: TF999 no throttle linkage
Post by: bgbazz on June 15, 2016, 05:44:23 PM

Quote from: wildwood on June 15, 2016, 03:18:35 PM

Very nice.....that'll have an epic induction roar....sucking in squirrels and small children. :icon_super:

Similar to what most of us used to run on our Holden panel vans....back in the day, Jez.

Title: Re: TF999 no throttle linkage
Post by: wildwood on June 15, 2016, 07:40:00 PM

Note to self,.....
Must find pic of the EH I had in Sydney........allthe toys..... 350 with th 350 and slammed.....
And painted black......great for a Sydney summer ....not :jpshakehead:


A trip to the boxes in the shed tomorrow