Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Anonymous on May 22, 2006, 02:06:41 PM

Title: Grand gearbox problem
Post by: Anonymous on May 22, 2006, 02:06:41 PM
My 4l auto grands started not wanting at times to chane up when pulling away at slow speeds

Several pumps of the accelerator over a few is getting it working again at the moment

Post on NAGCA suggests it could be the Governer but I also seem to recall mention being made of a belt on the gear box

Any thoughts or ideas...
Title:
Post by: Mike Pavelin on May 22, 2006, 06:24:07 PM
Normaly pressure governor solenoid or pressure governor sensor. The bands would cause slippage all the time.
Title:
Post by: Anonymous on May 22, 2006, 09:20:19 PM
Cheers Mike  Its off to Westbury tomorrow ....least I can try and blind them with a bit of knowledge
Title:
Post by: Anonymous on May 23, 2006, 03:19:44 PM
So much for my diagnostic skills.... :?

Knackered O2 sensor
Title:
Post by: Anonymous on May 23, 2006, 03:29:50 PM
Bad, but no where near as bad as the gearbox :)
Title:
Post by: Anonymous on May 23, 2006, 03:35:51 PM
Yup
Title:
Post by: Anonymous on May 23, 2006, 04:39:01 PM
Quote from: "Stew"
So much for my diagnostic skills.... :?


wasnt aware you had any.......... :shock:
Title:
Post by: trent on May 23, 2006, 04:40:57 PM
:rotflmao:  :brows:
Title:
Post by: Anonymous on May 23, 2006, 07:54:35 PM
He's got a shiney socket set though  :lol:
Title:
Post by: Anonymous on May 23, 2006, 09:21:25 PM
Feck off the lot of you and don't come pm'ing me when you want chillis..... 8)
Title:
Post by: Anonymous on May 23, 2006, 10:26:56 PM
behave you muppet, take your humiliation like a man or i'll tell em all i saw a barry manilow TAPE in your jeep radio...... :wink:
Title:
Post by: Anonymous on May 23, 2006, 10:57:29 PM
You're confusing me with someone else KD........

Mind you your confused at the best of times :lol:  :lol:
Title:
Post by: Anonymous on May 24, 2006, 09:03:18 PM
How do you pull up the fault codes on a 98 Larado??
Title:
Post by: Anonymous on May 24, 2006, 10:24:31 PM
adjust the rear view mirror, should be able to see the biggest fault with it in there  :lol:
Title:
Post by: Anonymous on May 24, 2006, 10:29:27 PM
dont you think that is just a bit TOO technical for him???

he will need drawings on paper to do that...... :lol:
Title:
Post by: Anonymous on May 24, 2006, 10:57:13 PM
Sod off you pair of camel droppings :lol:
Title:
Post by: Anonymous on May 24, 2006, 11:42:45 PM
Cheers

I'll give that a go mozza