Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: macabethiele on October 31, 2018, 05:15:22 PM
-
The battery on my Jeep is a replacement one being approx 175Hx175Wx353L a type 017.
Does anyone know if the type 019 battery will fit - its 190Hx175Wx353L I suspect not as the bonnet looks a close fit ?
There seems to be a better range of cca's on the larger casing.
-
I remember that the whole battery tray/box itself is a very close fit.
What I certainly DO remember is that the bolt/captive nut thinghy that holds the retaining plate down was partly rotted out.
What a ballache that was to loosen up and re-tighten.
I'd be surprised if you can go bigger.
-
I've got an 019 on mine, i cut the hold down tabs off either end
-
Just noticed that I put WJ when our second Jeep is a WK !!
-
Just noticed that I put WJ when our second Jeep is a WK !!
We knew that :003:
-
Just noticed that I put WJ when our second Jeep is a WK !!
We knew that :003:
Well the battery totally failed last week so had to bite the bullet and replace the old QH one that was the wrong size. I can confirm for future reference that a Type 019 casing will fit a 55 plate WK. i.e 190H x 175 W x 354 L.