Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Sooty on January 29, 2019, 04:01:51 PM
-
Hi all...
I had a problem on my fuel filter while I was working out in France.
I’ve managed to get a filter from acd in Blackburn.
I’ve fitted the item, but the sensor connection are different on one of the plug in’s!
Does it matter if there not connected, can the engine run with out them?
Many thanks
Ps, the other filter I had on, was a Landy one,
For those that helped last .... many thanks again by the way ..!
-
I don't know if these colours apply to all years but the red/black wire connector is the fuel heater, the brown/orange and brown wire connector is the water in fuel sensor. If that is disconnected you will probably get a warning light.