Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: MK1 on July 05, 2006, 12:18:06 AM

Title: Pins/Bolts
Post by: MK1 on July 05, 2006, 12:18:06 AM

I am after the pins that go from the end of the ant-roll bar to the top eye of the drop link. Yes, I know these are the UK terms.

They are shown in this picture but are shaded out along with the anti-roll bar ( just above the No. 48 ).

I can't find them on 4WD or Quadratec. Any Ideas as mine are bent, worn and corroded.
 
http://www.quadratec.com/advisor/jeep_o ... ension.jpg (http://www.quadratec.com/advisor/jeep_oem_replacement_parts/suspension/images/CJ_suspension.jpg)

Title:
Post by: rayc on July 05, 2006, 07:51:47 AM

Lighthouse will probably have them.  I got the rubber bushes for the front drop link bars from them.
Very cheaply I hasten to add!

Title:
Post by: Ric Jacques on July 05, 2006, 11:00:32 AM

Failing that it's just a bolt.  Go to your local nut and bolt shop with the id for the anti roll bar eye end.  They should supply you with a bolt, nut and washer(s).  You'll need a large dia washer for the drop link side.

I think they are 7/16 unf.  

Be sure and get grade 5 (3 dashes on the head) or 8 (6 dashes on the head).

If you have any real traumas PM me - I have to go get the hardwear to attach mine so I can get two lots and send you one.  We have a great shop here in Weston, they do any bolt you can imagine!

Title:
Post by: MK1 on July 05, 2006, 11:11:50 AM

Can't use a bolt as it has a tapered shank which fits into the anti-roll bar.

I can also get the old boy to make up some pins at work for me.