Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: keeko on July 25, 2006, 01:24:45 PM

Title: Its been asked a thousand times but...................
Post by: keeko on July 25, 2006, 01:24:45 PM

I `m not sure and its easier than surfing. Does the later model Cherokee 2002 onwards (Liberty thingy) wheels fit the older models ( 93-2001)?

Title:
Post by: Anonymous on July 25, 2006, 01:34:54 PM

nope!!!

Title:
Post by: keeko on July 25, 2006, 05:25:55 PM

.............shit........ :(

Title:
Post by: Mike Pavelin on July 25, 2006, 06:39:23 PM

They do fit, but the backspacing is wrong so they look real skinny unless you use spacers to move them out a bit. Oh, and they're 16 inch.

Title:
Post by: Plum on July 26, 2006, 08:51:24 AM

I thought (and please correct me if im wrong) that pre 1999 all jeep wheels where 4.5" BCD and from then onwards they where altered to 5.0" BCD . . .

Is that right or wrong ? ? ? ?

Title:
Post by: chrisjones on July 26, 2006, 10:24:18 AM

XJ, TJ and YJ are 5 on 4.5 as are pre '97 (I think) ZJ's

CJ 5 on 5.5

Not sure about the newer stuff or FSJ's, but someone else will know.

I have a feeling some of the FSJ's are 6 stud.

Title:
Post by: tim_aka_tim on July 26, 2006, 10:51:21 AM

http://http://www.discountedwheelwarehouse.com/Jeep___Vehicle_Bolt_Pattern_Reference.cfm

Title:
Post by: Mike Pavelin on July 26, 2006, 08:36:21 PM

KJ are 4.5" PCD like nXJ, TJ, ZJ, YJ.
CJ, WJ and WK are 5.5PCD.

Title:
Post by: Plum on July 27, 2006, 08:37:01 AM

ahhhhh ! ! !  . . . . . noted Mike . . . . .