Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Mike WJUK on August 05, 2006, 09:33:56 PM

Title: Trackbar/ Panhard rod question
Post by: Mike WJUK on August 05, 2006, 09:33:56 PM

Just wondering does anyone make or modify trackbar/ panhard rods suitable for lifted RHD Jeeps or does everyone just redrill the bracket to relocate the stock one?

The front axle on my Grand has shifted about half an inch or so with a 2" lift which i can live with but if (when!) i go higher it will need sorting out.

Title:
Post by: Warthog on August 05, 2006, 09:58:20 PM

Check out this OZ site: http://www.suburban4wd.com/components/components.htm (http://www.suburban4wd.com/components/components.htm)

Title:
Post by: ponyracer1 on August 05, 2006, 10:24:32 PM

Ya just redrill it about 22mm over and re-enforce the bracket with a piece of 3-4 mil steel.