Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Anonymous on August 05, 2006, 11:28:00 PM

Title: TJ rear bumpers
Post by: Anonymous on August 05, 2006, 11:28:00 PM
How do you attach the fog light to the aftermarket ones.....
Title:
Post by: Dodster on August 05, 2006, 11:34:03 PM
I fixed mine to the actual body just above the bumper.... :wink:
Title:
Post by: Tony Hill on August 05, 2006, 11:34:43 PM
Using the original foglamp bracket, I drilled two holes in the bumper, tapped them and bolted the bracket in place.

Marking up and drilling – 3 minutes
Buying a replacement when I couldn’t find my tap and die set – 1 hour
Tapping the two holes – 5 minutes
Hitting myself over the head because I found the old set when tidying away the new one – still going on!


Tony
Title:
Post by: Anonymous on August 05, 2006, 11:43:02 PM
Best get a new drill then   (oh and a bumper) :lol:
Title:
Post by: Dodster on August 06, 2006, 12:15:08 AM
How about this...

http://www.jeepclub.co.uk/classifiedpopup.cfm?id=4763 (http://www.jeepclub.co.uk/classifiedpopup.cfm?id=4763)
Title:
Post by: Anonymous on August 21, 2006, 10:52:31 AM
I mounted mine on the bestop tyre carrier I fitted..... Then, after the jeep fell off the highlift and mashed the factory fog light, I fitted a smaller Halfrauds one in the same place using the factory bracket to mount it to the side more.

Will post piccies if you want....

EE :twisted:
Title:
Post by: Anonymous on August 21, 2006, 11:33:30 AM
Think I'll do the drill n tap route....just havn't told KD yet :wink:
Title:
Post by: Asylum on August 21, 2006, 01:04:34 PM
Quote from: "Dodster"
How about this...

http://www.jeepclub.co.uk/classifiedpopup.cfm?id=4763 (http://www.jeepclub.co.uk/classifiedpopup.cfm?id=4763)


Its sold Unfortunately!!  :(