Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: daggie on October 21, 2006, 06:44:47 AM

Title: stupid zj q
Post by: daggie on October 21, 2006, 06:44:47 AM

how the feck, is the demister panel thingy fixed to the top of the dash  :twisted:

Title:
Post by: Dave69 on October 21, 2006, 11:35:55 AM

the covers are nomally just a push fit with a plastic spring clip that might have just lost it's spring so it will rattle.

Title:
Post by: greggmo on October 21, 2006, 10:34:39 PM

just poor a drop of superglue around it mate.

Title:
Post by: daggie on October 22, 2006, 07:20:02 AM

cheers,the manuals don't say anything & I didn't want to go in hamfisted, like  8)

Title:
Post by: Dave69 on October 22, 2006, 09:27:15 AM

if you want to get them out use a small jewelers screwdriver and carefully lift the edge and look. normally you can see the plastic spring clip, press this with the screwdriver and then look for the rest and pop them out in turn. or just put a small piece of cut foam under or a more permenant fix is like said a little dab of super glue