Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Groove Rider on December 17, 2006, 10:11:53 AM
-
Hello,
My diesel xj is having trouble starting in the morning, so I need to change the glow plugs I think...........now looking at the job there seem to be a couple of b4sterds to get too.............any tips on how to get these changed would be appreciated
-
Disconnect the supply rail/wires and test the resistance of each. IIRC they should be about 1/2 Ohm. If one or more is significantly highter than the rest, replace it. The ones behind the diesel pump are a bugger to get at so do this first and you might save yourself some hassle.
-
How can that be right £21.14 + vat each glow plug at my local dealership :roll: Paddock glow pugs do you reckon they will be ok.
Any recomendation as to where to buy :?
-
i have some used ones knocking around, not sure how many but they're yours if you need them
-
Thats bloody good of you Dave.......................................................... but if I am going to mash my knuckles up.........I only want to do it once :lol:
I may just buy the two b4sterd to get to ones, as people tend not to bother with those I guess
-
I got a set for my old WJ for 50 + vat from a local factors (set of 5, the 3.1 is a 5 popper). Had to try a few factors as they're not that common.
-
if you want new injectors get a price from George at the vm specialist you might be surprised. If you want them G-RIDER then just pm me an addy and i'll send them