Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Bubba on March 12, 2007, 11:50:10 PM

Title: wheel studs
Post by: Bubba on March 12, 2007, 11:50:10 PM

hey guys i am after some longer than stock wheel studs any ideas guy about half an inch longer than stock for a cj

Title:
Post by: isle of man on March 13, 2007, 09:00:34 AM

this is i mine field as i also required extra long studs and after two attempts from america i finally had them custom made.....it's the heal of the stud that was the problem for me, that is      the disc and hub combination, if you have a tech drawing i can see if the set i have here in my ever increasing stock of new and nearly new parts may be of use for you.






peter henry

Title:
Post by: JamesH on March 13, 2007, 12:30:38 PM

I could have sworn I saw some on Quadratec when I ordered my standard length ones a few months ago but can't find them now. They were pricey compared to standard ones though but were long enough if I remember right.

I also remember someone mentioning getting longer studs fitted by Surrey Off-road but I don't think they were as long as you want.

It might be worth making a couple of calls to see if either can help.

Title:
Post by: Mort on March 13, 2007, 12:38:32 PM

Have a word with Chris at Surrey Off-Road (01483 200046).  He has mega long ones that are made for drag racers that he cuts to size.  I have these fitted to my TJ which has shim type spacers.

Ah, James beat me to it!