Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: pazdude on October 26, 2007, 06:57:31 PM

Title: rear springs
Post by: pazdude on October 26, 2007, 06:57:31 PM

hey guys im trying to change the rear springs on my 95 xj td got the shackle bolts undone and the u bolts the problem is the bolt that goes into th chasis just keeps turning. do i need to cut it out and weld a new nut in there.
any advise would be much apriciated

Title:
Post by: greggmo on October 26, 2007, 08:49:24 PM

sounds like a chop and weld job mate. has the bolt even started to draw out?

Title:
Post by: Dave69 on October 26, 2007, 09:55:53 PM

i drilled through the floor to get a spanner on the nut that had come lose on mine, saves affecting the chassis leg with large holes when you get your dimensions slightly out