Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: wizard on June 06, 2005, 07:14:28 AM

Title: Breather info needed
Post by: wizard on June 06, 2005, 07:14:28 AM
As you may or may not know, i make sets of axle and gearbox breather kits for Land Rovers, now i want to make some kits up for the Jeepers out there.
I know that the gearbox breathers are already extended up into the engine bay, but what i need to know is the thread size on the original axle (and gearbox if fitted) breathers and what size pipe runs from the axle and gearbox.

I will offer a FREE kit in return for this info, and will require a few piccies for our web site when the kit has been installed.

So if you have a Cherokee or Wrangler and fancy a set of breathers.......

Regards
wizard

You can contact me at wizardsec@aol.com
Title:
Post by: greggmo on June 07, 2005, 12:39:42 AM
if i get chance to have a look i will, if not i am prety sure someone will. 8)
Title:
Post by: daggie on June 08, 2005, 05:57:19 PM
Wiz

the only breather I needed to extend was the rear one, a meter of 5mm id scilicon hose, routed it up in to the petrol filler flap, drilled a hole & put the origina breather end back on l  8)
Title:
Post by: Anonymous on June 12, 2005, 09:10:48 PM
If you want to have a poke around under my XJ, you are more than welcome!!
Title:
Post by: iwan on June 14, 2005, 07:54:33 PM
You might find this useful

http://www.darksiderz.co.uk/technical/b ... /index.htm (http://www.darksiderz.co.uk/technical/breather/index.htm)
Title:
Post by: wizard on June 14, 2005, 09:51:21 PM
Hi All

Thanks for all the info,
I think i will have to stop all the various Jeeps I see and ask the owners if I can poke about underneth for a few minuits.
I did that to a bloke in a 110 Defender in Saisburys car park a few weeks ago, He didnt bat an eyelid while I took some measurements of his steering damper..

Regards
wizard
Title:
Post by: Anonymous on June 14, 2005, 10:01:02 PM
Thats Sainsbury's shoppers for you bro :D  :smt101