Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: MOCAJ on January 27, 2008, 10:54:26 PM

Title: hub asembly
Post by: MOCAJ on January 27, 2008, 10:54:26 PM
Today i have been stripping out the front axle on 97 TJ to replace the U joint.

The hub assembly was a stubbon dastard and when i put the puller on it, the 2 parts seperated. Front part came out with studs fitted. I then had to get the rear out with the other half of the bearing. It all came Ok eventually but i have seen a replacement hub assembly is sold as one unit.  :?

Can i just press the 2 parts together after greasing it up  :?:

All seems ok, no play
Title:
Post by: isle of man on January 27, 2008, 11:03:00 PM
i would change it.



peter henry
Title:
Post by: greggmo on January 27, 2008, 11:31:42 PM
change it for now mate and maybe let us av a look at it with ya when we can. i got a usable spare if ya need it mate 8) in theory it should just pull its self back together but just swap it to be on the safe side.