Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Pajeropah on February 17, 2008, 05:24:51 PM
-
Anyone fittrd a set of MOPAR fog lights to this model? Any help would be appreciated as the instructions are a bit 'IKEA' like!! and seem more akin to a left hand drive model!
-
Well managed to get these fitted. A word of warning if anyone else goes with these. The instructions say to remove the White and Tan wire from the connector at the column switch and replace with the one coming from the new loom. If you do this the green foglight symbol will not light up in the dashboard. No need to remove it just splice the new white and tan wire to the original at the column switch and everything will work fine. Just one other thing though you will have to lengthen the nes white and tan wire so that it will be long enough to reach inside the car. Hope this might help someone else!
-
Thanks for the tips. It is appreciated. The KJ doesn't really have a big following within the club, and might explain the lack of responses. Lost KJ (http://http://www.lostkjs.com)would be a good source of info for your Liberty.