Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: tag on June 26, 2008, 01:04:17 AM

Title: Engine mounts!
Post by: tag on June 26, 2008, 01:04:17 AM

Looks like i need a new engine mount  near side,  off side is on it's way too. thats why i get a knock on start up!!   polly or rub ?........

Title:
Post by: dtooth on June 26, 2008, 04:16:34 AM

i have a set of poly ones you get some more engine noise than normal but very solid

i brought a few pairs from the stats from these people  http://browndogindustries.com/ (http://browndogindustries.com/)

i may have a pair left i think £50 the pair plus p&p if your interested .

will need to check  

Title:
Post by: tag on June 27, 2008, 09:17:01 PM

D, could be interested, ............i have the triangle type and the rubber is only bonded at the bottom is this normal? or is it failing?....cheers

Title:
Post by: dtooth on June 28, 2008, 03:47:45 AM

Heres a picture of a normal mount on left looks like its joined to the metal all way round .

http://www.jpmagazine.com/howto/31818/photo_06.html (http://www.jpmagazine.com/howto/31818/photo_06.html)


been a while since i did mine and my las tones were very poor probably caused the ehaust manifold to split

Title:
Post by: dtooth on June 28, 2008, 09:08:48 PM

i do have the mounts if you want em