Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: Nosebolt on August 23, 2008, 07:12:14 PM
-
Reassembly has started, tailgate works as a workbench
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0242_1.jpg)(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0241_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0234_1.jpg)
Front end waiting to be fitted later, I only have till Tuesday in the workshop so plan is to make the tub weather proof then I can put it back outside the house and clean and dress the engine before I fit the front bodywork, armor wont be ready for a week so can take my time.
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0236_1.jpg)
My home for last week
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0237_1.jpg)
-
Looking good, it will be easy to spot as well.
Cheers
Nick
-
Make sure you put plenty of wax on that piece of art.
So all of our drooling runs off the side!
-
are you having the name "tangoed" written on the side
-
:oops:
-
i'd be careful doing that cos some people in here will be calling you daisy and expecting you to wear hotpants!
-
I dont mind the hot pants but I aint shaving my legs
-
I'm not sure it's your legs you should be worried about.....
-
HOLY ORANGES 8-)
-
Taking it easy today, re-fitted the rear seat, hood and made some door strikers. Did try and fit the screen but decided to leave it to someone who knows what they are doing so its getting fitted Tuesday morning, I wont see it being fitted got to go and do a speeding course, don’t know why, I already know how to speed
. Anyway here are a few more unnecessary photos;
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0244_1.jpg)(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0245_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0246_1.jpg)(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0247_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0249_1.jpg)
-
you better come to cheapfest so we can admire it
-
only one weekend and a few afternoons to work on it but should get it drivable if not fully finished.
-
Looks like it's comming together nicely.
-
ya need to get the tubes fitted. lookin good.
-
thats looking cool
cant wait to have a look at cheapfest
-
Did a list of all the jobs I want to do on the CJ this morning and there was no way I would do it all before Cheapfest, so I'm not going to do em all.
Put the front end on today, it not quite lineing up 100% but its runable now. Glass tomorow and then a minor rework of the electrics.
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0260_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0259_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0258_1.jpg)
-
fuckin cool man 8-) 8-) 8-)
-
just do the important bits and get along to cheapfest
-
can't be that much to do unless it's bluetaked in place for the camera.
-
na everything on my todo list except for the electrics is cosmetic, dressing the engine, painting the chassis/wheels etc, then there is the matter of the slack springs but thats for when i get a bit more in the budget
-
looking hot mate
now when ya wanna paint my tj for me?
-
any time m8 but I only have PINK paint left
-
well id hate it - but the wife would thank you. It started as her jeep, i just dont wanna wheel a pink jeep. lol
-
Very fetching in pink...........
(http://http://i76.photobucket.com/albums/j20/wrxmart/barbiejeep.jpg)
-
is something wrong? I have been missing the daily updates here!!!!
-
had to do some paying work this week :shock:
most of the jobs I've been doing are the fiddly little jobs like fit the roll bar, seat belts, trace a fault in the lights (foot switch knackered, new one ordered), tidy the wiring, relocate the winch cut off and waiting for a few parts to turn up from the US.
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0268_1.jpg)
-
Looking Good
-
more little jobs today, fitted screen wash bottle, horn, hidden battery cutout, cigar lighter, routed the main componants for the alarm and made a glovebox liner.
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0271a_1.jpg)
-
Theres an idea hide the bling in the glove box
-
I am going to make it into a sun bed for small rodents
-
met a few of them in my time
-
what sunburnt rodents???
-
Hit a milestone today, I definitely WILL be at Cheapfest, it’s now back to road legal (ish) *cough* don’t mention the lack of wheel arches*, all lights now work, top of front wings filled in, rear number plate fitted, I even re-fitted the clino.
Should get the rest of the checker plate tomorrow PM, so like the front it will be fitted unpainted, also wont have time to make the rubber inserts for the inner wings but the main section is there.
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0272_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0276_1.jpg)
(http://http://birtydastardsjeepclub.com/forum/userpix/1234_moto_0278_1.jpg)
-
ok its dark, I have just finished rewireing the fuel gauge, oiled and greesed the underside, fitted new gearbox mount and the rest of the armor, got some worries about the front prop shaft, quite a bit of sideways play in the spline, but if the worst happens I'll have a 2wd jeep for a while. if anyone has a front prop for sale and can bring it to cheapfest I would be a very happy bunny. :P